Parts of the washing machine
Key points in washing clothes
Instruction on control panel functions
Instruction on washing courses
Manual washing course
Maintenance
Common non-fault phenomenon
Operation manual of full-automatic washing machine
Table of contents
Safety precautions
ES-W95TWXT
ES-W85TWXT
2
Operation manual
Thank you for purchasing our product.
Please read this manual carefully before use.
Please read “Safety precautions” carefully
before use.
Please keep this manual in a safe place.
Our product is intended to be used in household
and similar applications such as:
- staff kitchen areas in shops, offices and other
working environment;
- farm houses;
- by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments;
- areas for communal use in blocks of flats or in launderettes.
Page
4
7
8
10
11
12
13
15
17
Additional operating procedure
Things to know before washing
TINS-A293QBEZ
SHARP CORPORATION
OSAKA, JAPAN
1
Specification
5
Installation
5
Safety precautions
WARNING
INFLAMMABLES
GASOLINE
Do not allow children to play
with or look around the
wash-spin dry tub.
It is very dangerous.
Clothing stained with
flammable or explosive
substances such as
gasoline, kerosene and
so on, must not be put
into the wash-spin dry tub.
Do not use power supply
other than AC220-240V, 50Hz,
so as to avoid malfunction,
damage and fire.
Except service staff,
do not modify the machine.
Please do not disassemble and
repair the machine without
permission, so as to avoid fire,
electric shock, getting hurt or
malfunctions of the machine.
Do not place the machine at
high-humidity places such as
bathroom, locations where
wind and rain may get in,
and so on.
Otherwise, electric shock,
fire, malfunctions and
distortion may occur.
Use plug socket above 13A
separately. A loose plug socket
or the action of sharing a plug
socket with other equipments
may start a fire due to heat.
When cleaning the machine
body, the plug should be
pulled out first. Do not plug or
pull the plug with wet hand or
wet cloth, so as to avoid
electric shock.
Clean the dust on the plug
and plug socket to avoid fire.
Do not approach any fire
source to plastic components,
which has the risk of starting
a fire.
Do not use water to wash
components of the machine,
so as to avoid short circuit
and electric shock.
Never put your hand inside
the tub while it is still moving.
Even if the tub is moving at
low speed, your hand may get
wrapped up and get injured.
Wait until the machine
completely stops. Special
attention should be given
to children.
Do not use damaged power
cable, plug or loose plug
socket, so as to avoid short
circuit, electric shock, fire
and other accidents.
Do not change the original
state of power cable. Any
visible damage to the power
cable could cause electric
shock, electric leakage or
other malfunctions.
2
19
DISASSEMBLE
FORBIDDEN
FORBIDDEN TO
USE AT
HIGH-HUMIDITY
LOCATIONS
MANDATORY
MANDATORY
PULL OUT
THE PLUG
FORBIDDEN
TO
TOUCH
FORBIDDEN
TO
WASH THE WATER
FORBIDDEN
FORBIDDEN
FORBIDDEN
FORBIDDEN
FORBIDDEN
FORBIDDEN
This machine is not intended
for use by persons (Including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the machine
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the machine.
FORBIDDEN
Common non-fault phenomenon
Not a fault
Phenomenon
Others
There is a noise on the
radio or television, and the
image is unclear.
Keep the washing machine away from radio
and television as far as possible.
After washing is finished,
there are white lines around
the washing / spin drying tub.
The white powdery material is the result of the
combination of ingredients in detergent and
ingredients in water. (Wipe away with cloth.)
Please note that it will stick on where it is left.
Using liquid detergent or injecting water and rinsing
twice can prevent this phenomenon.
Not working.
Light cannot be on.
Is the power cord properly plugged in?
Is the power supply interrupted or is the main
switch in your house turned off?
There is abnormal sound.
Is the washing machine inclined or is it unstable?
Does the clothing deviate to one side during spin
drying?
Are there hair clips or other foreign metal objects
mixed in the clothing?
No water supply.
There is no water supply if the top lid is open.
Please close the top lid properly.
Tap leaks.
Are the screws or the installation position of the
water nozzle connection loose?
Is the water nozzle connection inclined or wobbly?
Inspection of a washing machine that have been used for many years.
Are there
situations
like these?
Does not operate sometimes.
“CHILD LOCK” does not work during
operation.
Water leakage (water hose, spinning
tub, tap connection).
There is burnt smell.
There is an abnormal sound or
vibration during operation.
Your hand feels numb while touching
the machine.
Power cable or plug is unusually hot.
To avoid injuries or accidents,
please pull out the plug from the
plug socket.
Call the nearest Sharp
Service Center to check your
machine.
Consult Sharp Service Center
for check and repair fees.
Stop using
the machine
Check
There is little water regarding
the amount of washing
clothing.
To adjust water level,
press the WATER LEVEL key.
18
3
WARNING
FORBIDDEN
CAUTION
DO NOT PUT
WATER-RESISTANT
ITEMS INTO
THE TUB
Do not wash water-resistant items.
Do not wash sleeping bags, shower
curtains, raincoats, rain ponchos,
rain covers, ski jackets, ski pants,
automobile covers and other water
-resistant items, so as to avoid
abnormal vibration and other
unexpected accidents /malfunction.
During spin drying, the washing
tub is rotating at high speed.
Because water in water-resistant
clothing could not be discharged
instantaneously, the machine will
be out of balance, causing abnormal
vibration and other unexpected
accidents /malfunction.
FORBIDDEN
Do not wash objects other than
clothing to avoid abnormal
vibration which causes damage
to machine.
FORBIDDEN
MANDATORY
When pulling out or plugging
the plug, do not touch the metal
part of the plug to avoid electric
shock or short circuit.
PULL OUT
THE PLUG
After using the washing machine,
pull out the plug to avoid electric
leakage, electric shock or fire
due to loose connection of plug.
MANDATORY
Before using, check carefully if
the connection of water inlet
hose and drain hose is reliable,
to avoid water leakage.
FORBIDDEN
TO TOUCH
When the machine is operating,
do not touch the bottom with
hand or foot, where there is
a rotating mechanism, so as
to avoid getting hurt.
Before using, check the
bottom of the product, make
sure there is no packaging
material left.
Do not put heavy objects
on the machine.
It may cause
distortion and damage.
The base opening must not
be obstructed by a carpet
when installing the washing
machine on the carpeted floor.
MANDATORY
After using, turn off the faucet
to avoid water leakage.
MANDATORY
FORBIDDEN
MANDATORY
To avoid accident /injury, if the power cord is damaged, it must only be replaced by an authorized
service staff or contact the nearest Sharp Service Center for assistance.
CAUTION
If powder detergent or liquid detergent spill over the top lid, or other plastic components,
wipe it away immediately, otherwise it may damage them.
Each time washing is finished, clean lint filter box. Otherwise it may not be effective in filtering lint.
The temperature of water must
not exceed 50
, so as to avoid
accidents of electric leakage
and electric shock due to
distortion or damage of plastic.
MANDATORY
The Power code of your
Washing Machine is equipped
with an Earthed plug.
This plug should always
be inserted to an earthed socket.
Common non-fault phenomenon
Phenomenon Not a fault
Water
inlet
Washing
Rinsing
Others
Sound in water hose and
water inlet valve.
Spinning
When washing or rinsing is
finished, the pulsator will
rotate slightly.
During the washing process,
the pulsator rotates
intermittently.
The pressure of tap water is relatively high.
Adjust amount of water.
To reduce vibration caused by offset of clothing
during spin.
In the soaking and washing in soak course, the
pulsator rotates once every 8 seconds, so that the
detergent can permeate into the clothing sufficiently.
When spinning starts, low-
speed rotation will happen for
a while. (Not rotating at high
speed immediately)
This action is done to adjust the balance and to
dry clothing sufficiently.
When spinning starts, the
machine gives off sounds like
“Patsa Patsa”.
During spin drying, water hits the tub side, which is
not abnormal.
During spinning process,
the program starts supplying
water and rinsing. (Spin
light indicator blinks quickly.)
During the rotation in spin drying, unbalanced load
is detected and corrected automatically.
(If the offset phenomenon cannot be changed by
auto-correction, the operation will stop
immediately.)
The clothing is spin
dried but not wringed dry.
The spin drying ratio of an automatic washing
machine is a little lower than that of a twin tub
washing machine. In case the spin drying of large
clothing such as towels, blankets etc. is uneven,
spin drying it again.
Operating parts are heated.
It is caused by the heat radiation of electrical
components.
Indoor lighting darkens
temporary.
The voltage of plug socket in your house drops
temporary when the motor starts up.
(Please use an exclusive plug socket.)
There is a sound of water
when tub body is rotated.
To keep balance during spinning, there is liquid in
the balance ring.
The detergent remains
undissolved in the
detergent case.
If tap water pressure is low, detergent tends to
remain, so please dissolve it in water beforehand
and put it directly into the tub.
Can not rinse thoroughly.
In the "NORMAL" course the rinse is "ECO
SHOWER RINSE", so if the tap water pressure is
low, the ability may decline.
If you are concerned, you can change to Normal
Rinse by "MANUAL OPERATION" (p.10)
and you can rinse thoroughly.
The new hose-sets supplied with the appliances are to be used
and that old hose-sets should not be reused.
Parts of the washing machine
Machine body
List of accessories
Name
Quantity
Water inlet hose
assembly
1 set
Drain hose
1
Operation manual
Bottom cover ＊
1
1
Screw ＊
1
174
Installation manual
1
Top lid
Adjustable foot
Control panel
Water inlet hose
connecting port
Power cable
Pulsator
Lint filter box
Cabinet
Drain hose
Warranty card
1
＊BottomcoverandScrewareappliedbyservicestaff.
KeeptheOperationmanualandinstallationmanual
forfuturereference.
Common non-fault phenomenon (Please refer to
this section if there is an abnormality happens.)
Abnormal display
Display
U9
E4
E3
E2
C
＊
Washing machine inclines or is
shaky.
The clothing is lopsided.
The end of drain hose is blocked.
The drain position isrelatively high.
Top lid is not closed during spin
drying.
Possible non-fault cause
Solution
Low flow at the faucet.
Water inlet filter net is blocked.
＊When water is not supplied enough to
operate the machine, this error code
will be displayed only after six hours.
It generates a beep when washing machine indicates abnormal display.
As the phenomenon may not be a fault,
please check it again before sending the machine for repair. In the case
of failure, please consult Sharp Service Center. Be sure not to disassemble and
repair the machine without permission.
Caution
There is a possibility
of malfunction.
The faucet is closed.
Top lid is openedwhen the
reservationcourse starts.
Drain hose is folded/crumpled/tied.
Increase water supply, press START/
PAUSE key.
Turn the faucet on, press START/
PAUSE key.
Clean the filter net, press START/
PAUSE key.
Close top lid.
Adjust drain hose properly, press
START/PAUSE key.
Clean drain hose, press START/
PAUSE key.
Level the washing machine by
adjusting the foot.(p.18)
Distribute the clothing evenly.
Turn off the power and pull out Power
cable. After wait 1 minute,
turn on and operate.
Top lid is opened during
CHILD LOCK.
Turn the power off, and check inside
the tub
CHILD LOCK is not released, unless
you reset it manually.
Caution
E1
E
Cannot spin drying.
Adjust drain hose properly.(p.6)
Wait for 10 minutes, and press
START/PAUSE key.
19
NOTE
＊:number
516
TUB CLEAN
Maintenance
In the case of cleaning the washing / spin drying tub
Do not put clothing in the tub in this course.
Caution
Press Power ON/OFF key
with the top lid closed.
2
3
Press COURSE key,
and select TUB CLEAN course.
Press WASH key, and select the washing time.
Press WATER LEVEL key, and select the water
level as necessary.
4
Press START/PAUSE key.
The washing machine starts to supply water,
and displays remaining operation time.
1
Put the washing machine cleaner for
cleaning the tub.
Standard washing/
spin drying capacity
Washing / Spin Drying
Rated Power Input
Model
Voltage/Frequency (V/Hz)
Water pressure
Weight
Dimensions
(W×D×H(mm))
Specifications
Standard water
consumption
Standard water level
Washing type
Swirl type
0.03 ~ 0.8 MPa
530 × 585 × 986
31 kg
220-240 V~ / 50 Hz
9.5 kg
200 W / 130 W
65 L
127 L
ES-W95TWXT
Installation
INNER TUB
1. Turn on the power,
select SPIN, and press
the START key.
→ Please wait until
spin finishes.
＊Don't put clothing.
2. Turn on the
power, and
press the
START key.
3. Open the lid. And when water
accumulates to the "BOUNDARY"
level, press the START key and
stop supplying water.
4. If the appliance is
inclined, the water
surface does not
coincide with the
perimeter of the
boundary part.
Use the ADJUSTABLE
FOOT to level
the machine.
STAINLESSTUB
BOUNDARY
PLASTICTUB
WATERSURFACE
ADJUSTABLEFOOT
The way to check whether the product is installed correctly
See Installation manual for detail.
ES-W85TWXT
8.5 kg
530 × 585 × 956
190 W / 130 W
62 L
125 L
15
6
Tub side
Maintenance
3. Confirm
if the top
lid is
closed.
4. Press START
/PAUSE key.
1. Detach lint filter box
from washing tub.
2. Clean lint filter box
and the tub side.
3. Attach lint filter box on
washing tub to a down-
-ward direction.
1. Turn off
the
faucet.
2. Turn on
the power
and press
WATER
LEVEL
key.
Make sure the
water in the hose
has been drained.
About 10 seconds
later, turn off the
power.
5. Dismantle
water inlet
hose.
Caution
The filter net is very easily blocked when it is used for a long period.
Clean it in the following way.
6. Clean the
filter net.
Caution
1. Every time after washing, turn off the faucet and power. (If necessary,
dismantle water inlet hose.)
2. Wipe the water in the tub after washing as soon as possible.
Use clean soft cloth.
3. Be sure to pull out the plug from the plug socket during maintenance.
4. Hanging power cord and drain hose is desirable.
5. Open top lid for about 1 hour after cleaning the tub.
6. Do not use solvents such as alcohol, cleanser and so on, because they
may cause damage to the surface of the tub.
Remove the filter
net and clean it.
Twist connecting
part, not hose.
Lint filter box
Clean it every time after using
Water inlet hose connecting port
Washing / Spin Drying tub
When the draining hose is not long enough,
please use extension hose.
The length of used extension hose should not exceed 1.5m.
(The inner diameter of draining hose is about 3.8cm).
If the hose is too long, it can be cut off at the narrow part shown
in the figure.
If a floor drain is used, the height from the ground
should not be under 10 cm.
If the drain hose is too high, the water supply will not
stop. This time, you should adjust the drain hose so that
the clearance to the floor is below 10cm, The water will
drain out, and then start again.
Plug the drain hose into the drain port tightly. If the drain
hose drops, water will flow to the ground and damage the floor.
Please do not plug the drain hose to the inside or bottom of
washing machine.
Change the direction of drain hose
Under
10cm
Cut the hose diagonally.
(not easily blocked)
If the elevation of
drain hose is too high,
situations such as “the
water supply is not
stopped but the running
stops” will happen.
If the drain hose is
folded or broken, it
will lead to longer
draining time or even
the abnormal stoppage.
Cut the hose if it is too long.
Cut the hose
diagonally.(not easily
blocked)
Wrong placement
Correct placement
Below 10cm
Under 10cm
Under 1.5m
Cut the hose diagonally.
(not easily blocked)
Drain hose
Cut
Installation
See Installation manual for detail.
7
14
When the power supply is “ON” status, hold down
“WATER LEVEL” key for 3 seconds.
After generating a beep, LED indicator is lit up on left
of main display, and cleaning the washing /spin drying tub
and the back side of pulsator.
(This course adds a cleaning process at the final spinning,
and prevents secondary contamination in the tub.)
CHILD LOCK
AUTO CLEAN
Additional operating procedure
1. Press
POWER ON/OFF
key.
2. Press SOAK key, and set the soaking
time as desired.
3. Press
START/PAUSE
key.
SOAK
4. The machine generates a beep and turns off when it finishes the course.
Display represents soaking time (11 steps):
5min → 10min → 20min → 40min→ 60min →
2hrs → 3hrs → 4hrs → 8hrs → 12hrs→ 24hrs
3. Press
START/PAUSE
key.
1. Press
POWER ON/OFF
key.
2. Select the course and hold down
course key for 3 seconds. (The LED
indicator is lit up on right of main display.)
4. After generating a beep, the machine is locked.
Key points in washing clothes
Pay extra attention to the following situations
Before washing, please remove mud and sand on clothing
first.
For very dirty parts of the clothing, smearing some liquid
detergent and rubbing them in advance may help.
For clothing that are easy to be torn, turn it inside out first
and then wash them.
Clothing which is heavy (Jeans, Big size clothing)
and easy to float (Socks, Handkerchieves, Fleece, Jackets)
should be put into the washing machine first
for an effective rotation of the clothes inside the appliance.
To avoid damage to tub and
pulsator...
Take coin, hair clip,
curtain hook out of pockets.
Turn clothes with zipper and
metalic buttonsinside out
Put bra etc. in washing mesh
bag.
To avoid damage to clothing,
winding of clothing...
Belts on apron and so on must be
knotted; zippers must be zipped.
Thin or easily damaged clothing must
be washed in washing mesh bag.
Clothing with metal decorations must
be washed in washing mesh bag.
For better washing...
Please check the washing mark.
Wash clothing separately that are
easy to fade.
For towels and other clothing
which easily produce lint,
wash them separately or use
washing mesh bag.
To protect the environment
...To avoid wasting water, detergent
and electricity.
When washing, wash clothes together.
Put in proper amount of detergent as
needed.
Reuse wash water.
While using washing mesh bag, put in as little clothing as possible. Too much
clothing will decrease the performance during rinsing and spin drying or cause
the offset of clothing during spin drying.
In this function, the error tone can be heard if top lid is opened after water supply starts.
If top lid is opened for 30 seconds, the error tone can be heard again and
the water is automatically drained.
It is only possible to operate POWER key in this mode.
To release the lock, hold down COURSE key for 3 seconds again.
13
8
Additional operating procedure
ADD LAUNDRY (ES-W95TWXT model only)
1. Press
POWER
ON/OFF key.
2. Press COURSE key,
and select the course.
3. Press RESERVE key,
and set the time as
desired.
4. Press
START/
PAUSE key.
Display represents reservation
time: 1hr → 24hrs.
5. Use the amount of detergent recommended by the detergent manufacturer.
6. Close the lid.
7. The machine generates a beep and turns off when it finishes the course.
To change the settings : Turn off the power and start again from the beginning.
＊To check the settings : Press any key.
RESERVE
1. Open the top lid, and add laundry.
To avoid washing performance from
decreasing, add small items only.
2. Close the top lid,
and press ADD LAUNDRY key.
3. Every time ADD LAUNDRY key is pressed, washing time is extended by 1minute,
and additional water is supplied accordingly.
Caution
You can press ADD LAUNDRY key until the washing time reaches its maximum of
15min, or the total times of pressing reaches 4times.
POWER
Control panel / Display
Caution
START/PAUSE
Press this key after turning on, selected course is started.
Plug the machine in and then press this key, the machine will
turn on. Press this key again, it will turn off.
If the machine is energized but not started, the power supply will turn
off automatically 5 min later.
Press this key again, the operation is paused. Press it once
again, the operation will resume.
7 8
1
2
4
5
6
249
5
6
QUICK WASH
Course for reducing the time to dry. Loading amount should be
AIR DRY
AIR DRY course greatly reduces the time to dry in the shade.
Select the time: [ - ](= 0 min) , 30 min, 60 min, 90 min.
WASH
RINSE
SPIN
Select WASH as necessary.
Select the washing time: 3 min – 15 min.
Select RINSE as necessary.
Select the rinsing time: 1 time – 3 times.
Select SPIN as necessary.
Select the spinning time: 1 min – 9 min.
3
1
10
3
COURSE
Press this key to select course. The icon under the course
name turns on when the course is selected.
Course for quickly washing daily clothing.
Loading amount should be 3kg or under.
The LED indicator turns on when this key is pressed.
Instruction on control panel functions
4kg or under.
DELICATE
< ES-W95TWXT >
7 8 249
5
6
3
1
DELICATE
< ES-W85TWXT >
9
12
Put the clothing in the tub, and press POWER ON/OFF key.
Before starting of rinsing, please select WATER LEVEL.
Select the course as necessary.
Put in detergent as required, and close the top lid properly.
Operate only spinning
Operate only drainage
Manual washing course
Select the necessary processes.
(In these cases, please keep the top lid closed.)
Press START/PAUSE key.
1
2
3
Only spinning etc.
Only rinsing and spinning
In the cases below
Ex.
CHILD LOCK
AUTO CLEAN
Removes the dirt in the washing / spin drying tub and
the back side of pulsator with clean water at the final spining.
(p.14)
Additional
function
This function is to prevent children and infants from drowning.
(p.14)
ADD LAUNDRY
Press this key to add laundry after course is started.
Adding laundry is acceptable when a beep is generated
by pressing ADD LAUNDRY key.(p.13)
10
MAIN DISPLAY
SUB DISPLAY
This display shows remaining operation time,
reserved time (p.13), and error codes (p.17), when
each function is selected or problems occur.
This display shows water level, and soaking time(p.14)
when each function is selected.
NORMAL
JEANS
DELICATE
BLANKET
TUB CLEAN
Wash sturdy and heavily soiled clothing.
Clean washing / spin drying tub.
Select the washing time: 2 hrs, 6 hrs, 9 hrs.
Wash strongly for blankets or heavy clothing.
BABYCARE
Wash gently and rinse thoroughly for baby clothing.
AROMA
*ECO
< Instruction of course >
Wash gently delicate, or hand-wash fabric. Loading
amount should be 3kg or less.
Wash normally soiled everyday clothing.
Wash clothing effectively to last softener scent.
The clothing will be soaked in water with softener.
Water is saved by 1 time static shower rinse.
Control panel / Display
Select the appropriate water level depending on course or
kinds of clothing as necessary. (Select from 8 levels)
WATER LEVEL
7
SOAK
When SOAK course is selected, the LED indicator is turned on.
During soaking, the water in the tub is stirred intermittently.
Select the soaking time: 5 min – 24 hrs.
This function can be added to every course except for
TUB CLEAN course.
8
RESERVE
Reserves the time as desired. Select the time: 1 hr – 24 hrs.
(p.13)
9
The nominated program *ECO is recommended for normally soiled load equal to the
rated capacity in the product.
11
10
1. Press
POWER ON/OFF key.
2. Select a washing course.
3. Press
START/PAUSE key.
Instruction on washing courses
1. Press
POWER ON/OFF key.
3. Press
START/PAUSE key.
2. Press AIR DRY key, and the
light turns on.
AIR DRY
Display represents drying time:
30min → 60min → 90min → 0
Auto courses
This washing machine selects the appropriate water level and the operation time
automatically with the sensing function. In the case of operating
the automatic sensing function, there should be no water left in the tub.
The automatic sensing function does not work when you select the water level
manually, or when you select the following courses : HIJAB, BLANKET, TUB CLEAN
Things to know before washing
Select the course depending on the type of clothing or soiled level on clothing.
Once you press START/PAUSE key, you cannot change the course. When you
want to change the course, turn off the power and select the desired course again.
LED indicator blinks when in operation, and lights when the course is selected.
When the motor gets hot beyond a safe limit, it fail-safes on itself, and can’t work enough.
Do not operate the machines many times in a row.
ECO SHOWER RINSE
The program in the "NORMAL" course is the "ECO SHOWER RINSE".
It can rinse by supplying water while rotating the tub, so it is possible to reduce the
amount of water used.
＊When water pressure is less than 4L /min , ECO SHOWER RINSE
is replaced with Normal RINSE. To check whether Normal RINSE is set,
press QUICK WASH key for 3 seconds. In case Normal RINSE is set,
RINSE LED indicator blinks rapidly.
DRAIN
SPIN SPIN RINSE
WATER
SUPPLY
SHOWER
ECO SHOWER RINSE Normal RINSE
WASH RINSE SPIN
In BLANKET course, keep the blanket below the line .
In BLANKET course, fold the blanket as below.
The machine generates a beep and turns off when it finishes the course.
The beep sound setting can be turned off by pressing COURSE key and AIR DRY key
simultaneously after the operation starts.
QUICK WASH
1. Press
POWER ON/OFF key.
3. Press
START/PAUSE key.
2. Press QUICK WASH key.
＊Thiscourse'srecommendedlaundryamountis3kgorunder.
＊Thiscourse'srecommendedlaundryamountis4kgorunder.
Purpose
AUTO CLEAN
TUB CLEAN
Daily Care
Maintenance
Washing Machine Cleaner
Not necessary
Necessary
Contents
Rinsing the tub pulsator at the final
spinning process of selected course
Washing the tub for 2/6/9 hours
(Including Soaking process)
< To keep the tub hygiene - AUTO CLEAN and TUB CLEAN >
