Loading ...
MENU
ON/OFF
UPDOWN
LOCKTIMER
The product is quiet without fan, using high power relay motherboard without heat
output. When the heating temperature reaches the upper limit of the program set value,
the ceramic plate stops working, and starts working again when it is lower than the
lower limit, so as to ensure that the constant temperature on the furnace surface is at
the set temperature, saving energy and high efficiency
1. Power: when connected to the power supply, there is a sound of dripping, and all
the displays shine at the same time.
2. Power button: press the key for 0.5 seconds to drop a sound into standby, power
indicator light, five furnace area display -. (In standby state, when there is no operation
for 10 seconds, five furnace areas - no display. When there is no operation within 2
minutes, one sound will automatically exit standby and return to shutdown state.
Standby state is shown as follows:
3.3. Heating: For example, if you want to use the middle furnace area for heating, press
there is a sound and digital display 0, it indicates that the furnace area is selected
successfully, and then press the sliding area below to adjust the desired firepower
gear, heating opening is completed. This furnace area is double ring heating. Ring is
turned on by default. When heating, press the button of furnace area again to switch
single/double ring heating. When the double ring is heated, the indicator lights on the
side Note The simultaneous heating of the two rings is enabled.
Loading ...
Loading ...
Loading ...