Belling BEL FARMHOUSE 110 CHIM 110cm classic chimney hood with 3 speeds, 2 round LED multi-spot lights and 3 grease filters. Quietmark award

User Guide - Belling Range Hoods - Page 8

For BEL FARMHOUSE 110 CHIM.

PDF File Manual, 231 pages, Read Online | Download pdf file

BEL FARMHOUSE 110 CHIM photo
Loading ...
Loading ...
Loading ...
CARE & CLEANING
Before cleaning or maintenance, switch off the electricity supply.
Replacing the LED Lights
If the appliance version is with LED lamps, the intervention of a specialised technician is necessary to replace
them
Outer Casing
All external parts of the outer casing can be safely cleaned with a clean cloth wrung out in hot soapy water.
Do not use caustic pastes, abrasive cleaning powders, wire wool, hard implements, or any products containing
chlorides as they will damage the surfaces.
Stubborn marks can be removed using a stainless steel cleaner. We recommend that you clean the whole of
the stainless steel area to maintain a uniform finish.
Sharp objects can mark the surface of stainless steel, but marks will become less noticeable with time.
To maintain the finish of the stainless steel, or to remove any greasy marks, wipe the stainless steel surface
sparingly with a minimum amount of Baby Oil and kitchen paper.
Do not use cooking oils, as these may contain salt, which can damage the stainless steel surface.
Before cleaning or maintenance, switch off the electricity supply.
To avoid any fire risk, the following cleaning instructions must be followed:
Grease Filters
The grease filters absorb grease and dust from cooking fumes, which would otherwise damage the inside of
the hood.
The grease filters should be removed and cleaned regularly - with normal use, this should be every 2 months.
To clean use warm soapy water, or wash in a dishwasher. The grease filters may slightly change colour
following washing, however this does not affect their performance.
Important: Frequent washing is essential to prevent a build-up of grease in the filters which could become a
fire hazard.
1. Remove the filters from the hood.
2. Carefully wash the grease filters in hot soapy water and dry with a clean towel.
3. Refit the clean filters.
Carbon Filters (models installed for use with the re-circulation method only)
The carbon filters absorb cooking odours and need renewing after about 6 months of normal use. Replacement
carbon filters can be obtained from our Customer Care (details at the rear of the handbook).
Saturation of the activated charcoal in the filter will depend on how often the hood is used, the type of kitchen
and the regularity of cleaning the grease filter.
The carbon filters cannot be washed - renew every 6 months.
EN-7
Loading ...
Loading ...
Loading ...