Clore Automotive JNC1224 Jump-N-Carry 3400/1700 Peak Amp 12/24V Jump Starter

User Manual - Page 8

For JNC1224.

PDF File Manual, 32 pages, Read Online | Download pdf file

JNC1224 photo
Loading ...
Loading ...
Loading ...
8
Q. Can the Jump-N-Carry battery be replaced?
A. Yes,callTechnicalServiceat(913)310-1050(U.S.).
Q. Can the Jump-N-Carry be recycled?
A. Yes, the environment was one of our main concerns in the development and
design of the Jump-N-Carry. Most battery outlets can dispose of this product at
its life’s end. In fact, your Jump-N-Carry contains a sealed, non-spillable lead acid
battery and proper disposal is required by law. See Battery Removal and Disposal
Instructions.
Q. I have a regular 10 amp battery charger, can I use it to recharge the
Jump-N-Carry?
A. No, only the methods reviewed in the “Recharging” section should be used.
Q. Is the Jump-N-Carry goof proof?
A. No, jump starting instructions must be followed. Read and understand all safety
and operating instructions in this manual and those found in the owner’s manual of
any vehicle being jump started before using your Jump-N-Carry.
Storage
The Jump-N-Carrymaybestoredvirtuallyanywhere,andinanyposition.However,
take precautions to ensure that the positive and negative clamps do not come into
contact with each other or a common metal surface. We recommend storing the
Jump-N-Carry in the box in which it was originally received. Always be sure to re-wrap
cables and re-holster clamps after each use and prior to storage.
Testing The Battery
After fully charging the battery (see “Recharging” section), with the unit connected in
12V mode, apply a 100 amp load to the unit for a period of 6 seconds, while monitoring
the battery voltage. The battery is good if the voltage is 9.5 Vdc or higher.
Loading ...
Loading ...
Loading ...