Loading ...
Loading ...
Loading ...
7
Questions? We’re here to help!
Visit: shopelitegourmet.com for support on this product.
CLEANING & MAINTENANCE
1. Turn the switch to Off. Close the Juice Spout Cover and remove the Cups.
Unplug the juicer and allow it to cool completely before cleaning.
2. Remove the Chute by turning the chute counter-clockwise until the “arrow
sign” aligns with the “unlock sign”. (Fig 5)
3. Remove the Squeezing Auger by pulling it out upward. If it is difcult to
remove, move auger slightly left to right while pulling upward. (Fig. 6)
4. Remove the Juicing Bowl by lifting it upward vertically. (Fig 7)
5. Wash the disassembled parts under running water. Use the included Cleaning
Brush to clean the sieve/strainer properly.
6. Use the chisel end of the Cleaning Brush to help remove brous material from
the Pulp Spout.
7. If there is still residue in the mouth of the Spout, you can turn the Juicing Bowl
over, open the Silicone Pressure Valve and rinse with water. Then reattach the
valve. (Fig 8)
8. To clean the seal ring in the center of the juicing bowl, please follow the steps
below:
a. Turn the juicing bowl upside down for easier handling. Push the seal ring out
with your thumb (Fig 9) and clean it with water.
b. After cleaning, install the seal ring in the center of the juicing bowl. The
ribbed surface should face upward (Fig. 10). Make sure the groove of the seal
ring is secure in the juicing bowl.
c. The at side of the seal ring will be inside the juicing bowl while the ribbed
side will be facing outward. (Fig 11)
Fig. 5 Fig. 6 Fig. 7
Fig. 8
Fig. 9 Fig. 10 Fig. 11
Loading ...
Loading ...
Loading ...