Loading ...
Loading ...
Loading ...
4
HANDLE
The handle attaches to the basket holder and the basket.
To remove the basket holder from the body:
1. Steady the body with one hand
2. Grip the handle with the other hand and pull the basket holder out of the body
3. Rest the basket holder on an insulated mat.
To remove the basket from the basket holder:
1. Slide the cover away from the handle, to expose most of the lock
2. Press the lock down to unlock the handle from the basket holder
3. Lift the handle and basket up and out of the basket holder.
USING
• Sit the appliance on a heat-resistant surface.
• Put the plug into a power socket (switch the socket on, if it’s switchable).
1. Set the temperature control to the temperature you need.
2. Set the timer for 3-5 minutes, to preheat the appliance.
3. When you turn the timer from 0, the power light will come on. It’ll go out then the timer returns to 0.
4. The thermostat light will come on, then cycle on and off as the thermostat maintains the temperature.
5. When the power light goes out, remove the basket holder. Fit the partition, if required.
6. Put the food into the basket – don’t overfill.
7. Leave enough space between pieces of food to allow the hot air to circulate.
8. Slide the basket holder back into the body.
9. Set the timer to the time you need.
10. About half way through cooking, remove the basket holder, give it a shake, and/or turn the food over,
then replace the basket holder in the body.
11. The element will switch off when you remove the basket holder, then switch on again when you
replace it. The timer will continue to count down.
12. When the timer returns to 0, and the bell sounds, unplug the appliance.
13. To switch off manually, turn the timer to 0.
Once cooking is finished:
1. Remove the basket holder.
2. Check the food is cooked. If you’re in any doubt, cook it a bit more.
3. Set the basket holder on an insulated mat.
4. Press the lock down to unlock the handle from the basket holder
5. Lift the handle and basket up and out of the basket holder.
CARE AND MAINTENANCE
1. Unplug the appliance.
2. Leave everything to cool down.
3. Wipe the inner and outer surfaces of the appliance with a damp cloth.
4. Handwash the removable parts, rinse, and dry.
` You may wash these parts in a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes. The
damage should be cosmetic only, and should not affect the operation of the appliance.
Loading ...
Loading ...
Loading ...