Loading ...
Loading ...
Loading ...
9
4. Lock the aluminum shaft with the locking knob (Fig. 5).
Fitting the Safety Guard
mWARNING! The safety guard must be properly installed.
The guard provides the operator and other bystanders with
some protection from thrown objects.
1. Lay the trimmer on the ground with the trimmer head
facing upward.
2. Place the safety guard on the metal bracket and align with
the 4 mounting holes. Secure the safety guard to the metal
bracket with the screws provided (Fig. 6).
NOTE: Never use the tool unless the safety guard is properly
tted.
Fitting the Auxiliary Handle
1. Flip the auxiliary handle lock up to release the handle lock.
(Fig. 7).
2. Slide the auxiliary handle onto the base plate. Make sure
the tabs on both sides of the auxiliary handle slide into the
slots on the base plate. Push until it clicks into position
(Fig. 8).
3. Adjust the auxiliary handle to a comfortable working
position. Lock the auxiliary handle by ipping the handle
lock down (Fig. 9).
Fig. 4
Cable
Locking
knob
Shaft
joints
Aluminum shaft
Fig. 5
Locking knob
Shaft joints
Fig. 6
Safety guard
Safety guard
screws
Trimmer head
Metal bracket
Upper
aluminum shaft
Flip up to
unlock
Auxiliary
handle lock
Fig. 7
Fig. 8
Auxiliary
handle
Base plate
TabSlot
Fig. 9
Auxiliary
handle lock
Flip down
to lock
Loading ...
Loading ...
Loading ...