Honeywell 8734301 User Manual

Loading ...

Page 3

5. INSTALLING THE LATCH (need phillips head screwdriver)

a.Makesurethefaceplatesitsushwiththedoor.Donotforce

theLatchintothemortiseush.Chiseloutexcessmaterialif

necessaryforausht(Figure5a).

b.Usingtwo3/4”(19mm).screwsprovided,screwtheLatchintothe

doorwithahandheldscrewdriver.DONOTOVERTIGHTEN

(Figure5b).

ADJUSTINGLATCH

NOTE: Latch is shipped with the backset set at 2-3/8” (60mm)

Measurethebackset(backsetisdistancebetweenedgeofthedoorandthe

centerofLock).

TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET

TO CONVERT FROM 2-3/4” (70mm) BACKSET TO 2-3/8” (60mm) BACKSET

2-3/8"(60mm )

PULL

2-3/4"(70mm)

PUSH

NOTE: Curved part of Latch always faces

curved portion of Strike Plate

INSTALLINGLATCH

Figure5a

Figure5b

Loading ...

Honeywell 8734301 Safes & Door Locks Electronic Entry Lever Door Lock, Satin Nickel, 6.5 x 8.8 x 9 inches