Loading ...
T+/T+PRO English Instruction Sheet
Page 2
Safety Information
XWWarning
To avoid possible electric shock or personal injury, follow
these guidelines:
• Use the Tester only as specified in this instruction
sheet, otherwise the protection provided by the Tester
may be impaired.
• The Tester is to be used only by qualified personnel.
• Do not use the Tester if it is damaged. Inspect the case
before use. Look for cracks or missing plastic. Pay
particular attention to the insulation surrounding the
connectors.
• Inspect the test leads for damaged insulation or
exposed metal. Check the test leads for continuity.
Replace damaged test leads before using the Tester.
• Do not use the Tester if it operates abnormally.
Protection may be impaired. When in doubt, have the
Tester serviced.
• Do not operate the Tester around explosive gas, vapor,
or dust.
• Do not apply more than the rated voltage, as marked
on the Tester, between terminals or between any
terminal and earth ground.
• When measuring hazardous voltage, verify the Tester’s
operation by measuring a known voltage.
• Only the test probes and batteries are serviceable.
When servicing, use only specified replacement parts.
• To determine the LEDs and beeper are working
correctly, short the test leads together. The beeper
sounds (if enabled) and all LEDs and display segments
(T+ PRO) switch on briefly indicating correct operation.
• Comply with local and national safety requirements
when working in hazardous locations.
• Use proper protective equipment, as required by local
or national authorities when working in hazardous
areas.
• Use caution when working above 30 V ac rms, 42 V
peak, or 60 V dc. Such voltages pose a shock hazard.
• When using the probes, keep fingers away from the
ends of the probe tips.
• Connect the common test lead before connecting the
live test lead. When disconnecting the test leads,
disconnect the live test lead first.
• Do not operate the Tester with the battery door or
portions of the cover removed or loosened.
• When the batteries are depleted, self test will not
function.
• When the beeper is disabled, it will not sound until the
beeper is reactivated.
Loading ...
Loading ...
Loading ...