User Manual Linarie LYBO70DMF 70L Built-In Electric Oven

How to remove the door from the oven?


To simplify cleaning the interior of the oven, the door can be removed.
The process of removing the door is shown below:
- 1. Open the door to the maximum angle and pull the lock back at the hinge of the door(Figure 1). There are two
locks on both sides of the oven door.
- 2. Close the oven door, at about 15 degree, then lift the door, and slowly pull out from the oven. See photo instructions on page 11
https://manualsfile.com/product/k33bd9kxshj.html?page=11#contentPage
- 3. After cleaning, perform the above-mentioned operations in the opposite steps to restore the door to its original condition.


Note: After using a specific detergent, run the oven for 15-20 minutes with maximum heating settings to remove residues in the oven. In this process, touchable parts may be hotter than usual. Keep children away from the oven.

The probe used in the oven is a mechanical physical probe. Do not replace it without authorization.

In case of abnormal temperature sensing of the sensor probe, please contact the designated repair shop immediately for replacement.

The oven has a light with the following characteristics:

25W and 300°C. Bulb and cover.

1. During use of the appliance, it becomes hot.

Care should be taken and avoid touching the heating elements inside the oven.

2. Ensure that the appliance is switch off before replacing the lamp to avoid the possibility of electric shock.

3. Remove the glass cover that protects the light bulb by turning it counter clockwise.

4. Unscrew the old light bulb and dispose it safely and ecologically.