Loading ...
Loading ...
Loading ...
CLEANING YOUR HEATER
The heater requires regular cleaning to ensure trouble free operation:
Unplug the heater from the mains supply before cleaning.
Ensure that the heater has been allowed to cool down completely before cleaning.
Use a damp (not wet) cloth to wipe the exterior of the heater to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from the inlet and outlet grills.
To clean behind the heater (when mounted on a wall); unfasten the two locking screws located on the top
of the mounting bracket, press down on the two release catches on the mounting bracket to tilt the heater
forward.
When the heater is tilted forward, it is easier to clean behind it.
It is important to return the heater to its original position after cleaning and to refasten the locking screws.
Ensure the heater is dry before plugging back into the mains supply.
IMPORTANT! NEVER COVER THIS HEATER!
CAUTION
The heater generates heat during use. Proper precautions must be taken to prevent the risk of burns,
scalds, fires or other damage to persons.
Do not use this heater with a separate programmer, separate timer, separate remote-control system or any
other device that switches the heater on automatically.
WARNING: Keep all objects at least 1 metre from the front and sides of the appliance.
WARNING: Take care in positioning your heater, using the Timer will mean the heater will come on
automatically. Fire may result if placed next to combustible material.
Do not attempt to dismantle the heater. There are no user serviceable parts. For service or repair, contact
an authorised electrical service technician.
Cleaning and Maintenance
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
info@cdbgoldair.com.au
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Loading ...