Loading ...
Loading ...
Loading ...
Clearing blockages
Check the wand
Open the cap on the handle and slide the wand upwards until both the wand
and hose release from the machine.
Press the button on the end of the hose to release the wand.
Look through the wand to check for blockages.
Open the cap on the handle and slide the wand upwards until both the wand
and hose release from the machine.
Press the button on the end of the hose and remove the wand.
Press the button on the bin handle and remove the bin. Press the tab on the
base of the hose to remove it from your machine.
Check for blockages in the hose, be careful of any sharp objects.
Check airways for blockages
Recline your machine and remove the outer cover of the ball.
Press the button on the handle of the bin and lift it away from your
machine. Locate the clear inspection panel at the bottom of the bin recess
on your machine and lift it to one side. Remove any debris.
Remove the cleaner head and look for blockages in the airway.
Check all the airways, removing any debris before reassembling your
machine.
Check the hose
Remove cleaner head
If any part of your machine becomes blocked, it may automatically cut out
and the power will stop.
Unplug and leave your machine to cool before checking for blockages.
Lay your machine on its back.
Push down the red button on the bottom of the ball and then slide your
cleaner head down and off your machine.
You should check for blockages
in a number of locations on
your machine, the wand and
hose and the cleaner head and
airways.
The cuff is located
at the back of
the machine, just
above the ball.
Press down on
the top of the
button to release
the cleaner head.
Pull the cleaner
head upwards to
remove it from your
machine.
The button to
release the cleaner
head is located
at the back of the
machine between
the ball and
cleaner head.
Loading ...
Loading ...
Loading ...