Loading ...
Loading ...
Loading ...
Fit the cleaner head
Assembling your machine
Lay your machine on its back.
Slide your Motorbar™ cleaner head into position on the front of the ball.
Push upwards until the red button on the underside of your machine clicks
securely in place.
Stand your machine upright.
Fit the wand
Wrap the cable around the top and bottom cable hooks and secure with the
cable clip.
Fit the tool holder
Slide the tool holder into position on the side of your machine.
Fit your combination tool onto the holder.
Slide the handle onto your machine until it clicks into position.
Position the wand into the end of the hose. Press the wand release button on
the end of the hose and slide the wand all the way down.
Position the wand and hose in the handle recess on your machine. Slide the
wand down into the handle until it clicks into position.
Close the wand end cap.
clik
clik
clik
An arrow shows the
position in which the
cleaner head is placed.
An audible sound is
shown making a click.
An arrow shows the
wand being pushed
back into the handle.
The wand is
clicked back onto
the hose. And
pushed back into
the machine.
The tool holder
is attached to
the machine
just below the
handle.
A combination
tool is attached to
the tool holder.
Loading ...
Loading ...
Loading ...