Loading ...
Loading ...
Loading ...
Operating Instructions: Melitta
®
Solo
®
& Perfect Milk | 1830-0618 | 2018-08
26
Cleanin
g and maintenance
GB
The cleaning programme should be
performed every 2 months or after 200
brewed cups, however, at the latest when
is illuminated.
■ Before starting the cleaning program,
clean the brewing group and the interior
("Cleaning the brewing unit", page 25).
Only use Melitta
®
PERFECT CLEAN
cleaning tabs.
■ Switch off the device.
■ Fill the water tank with tap water up to
the max. mark.
■ Insert the water tank.
■ Press the
and buttons
simultaneously for longer than
2 seconds.
ashes, illuminates.
■ Empty the drip tray and coffee grounds
container.
■ Insert the drip tray without the coffee
grounds container
■ Place the coffee grounds container
under outlet 2.
Cleaning phase 1 (
):
Two rinsing processes will be executed.
When
illuminates, proceed as follows:
■ Remove the brewing unit.
■ Put a cleaning tab in the brewing unit
(Image C).
■ Insert the brewing unit.
Cleaning phase 2 (
):
When
illuminates, proceed as follows:
■ Fill the water tank with tap water up to
the max. mark.
■ Press the
button to continue with
the cleaning programme (takes about 5
minutes).
Cleaning phase 3 (
):
When
illuminates, proceed as follows:
■ Empty the drip tray and coffee grounds
container.
■ Insert the drip tray without the coffee
grounds container
■ Place the coffee grounds container
under outlet 2.
Cleaning phase 4 (
, the middle
bean is ashing):
■ The cleaning programme will be
continued again and takes about
5 minutes.
When
illuminates, proceed as follows:
■ Empty the drip tray and coffee grounds
container and insert them in the
appliance as usual.
The cleaning programme is nished.
Integrated descaling programme
WARNING
The descaling agent can cause skin
irritations!
▶ Comply with the safety instructions
and the dosing information specied
on the descaling agent packaging.
The integrated descaling programme
(takes about 30 minutes) removes lime
residues inside the appliance. The symbol
for descaling
ashes during the entire
process.
The descaling programme should be
performed every 3 months, however,
at the latest when
illuminates
("Setting the water hardness", page 24).
Only use Melitta
®
ANTI CALC.
■ Switch off the device.
■ Remove the water lter if necessary
("Water hardness and lter", page 24).
■ Press the
and buttons
simultaneously for approx. 3 seconds.
ashes, illuminates.
Loading ...
Loading ...
Loading ...