Dji CP.MA.00000574.01 Mini 2 SE Fly More Combo Drone

User Manual - Page 29

For CP.MA.00000574.01.

PDF File Manual, 57 pages, Read Online | Download pdf file

CP.MA.00000574.01 photo
Loading ...
Loading ...
Loading ...
28
©
2023 DJI All Rights Reserved.
Remote Controller
Profile
DJI Mini 2 SE comes equipped with the DJI RC-N1 remote controller, which boasts DJI’s long-range
OcuSync 2.0 transmission technology, oering a maximum transmission range of 6 mi (10 km) and 720p
when displaying video from the aircraft to DJI Fly on your mobile device. Easily control the aircraft and camera
using the onboard buttons. The detachable control sticks make the remote controller easier to store.
In a wide-open area with no electromagnetic interference, OcuSync 2.0 smoothly transmits video links
at up to 720p. The remote controller works at both 2.4 GHz and 5.8 GHz, and will automatically select
the best transmission channel.
The built-in battery has a capacity of 5200 mAh and a maximum run time of 6 hours. The remote
controller charges the mobile device with a charging ability of 500mA@5V. The remote controller
automatically charges Android devices. To charge iOS devices, make sure that the charging function is
enabled in DJI Fly each time the remote controller is powered on (Charging for iOS devices is disabled
by default).
Compliance Version: The remote controller is compliant with local regulations.
Control Stick Mode: The control stick mode determines the function of each control stick movement.
Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can
be congured in DJI Fly. The default mode is Mode 2.
Using the Remote Controller
Powering On/O
Press the power button once to check the current battery level. If the battery level is too low, recharge
before use.
Press once, then press again and hold to power the remote controller on or o.
Charging the Battery
Use a USB-C cable to connect the USB charger to the USB-C port of the remote controller. It takes
approx. four hours to fully charge the remote controller.
Controlling the Gimbal and Camera
1. Shutter/Record Button: press once to take a photo or to start or stop recording.
2. Photo/Video Toggle: press once to switch between photo and video mode.
Loading ...
Loading ...
Loading ...