Loading ...
Loading ...
Loading ...
Installation
the rear corner of the cabinet, then make iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
i_k WARNING
ALL UNITSCANTIP
iNJURY COULD RESULT
iNSTALL ANTI-TIP
BRACKET PACKED
WITH UNIT
SEE INSTRUCTIONS
@
5
6
temporary lines on the floor marking the
front corner of the cabinet, excluding the
drawer. Slide the wine cooler out of the
way. From the temporary lineextend the
sidewall line back 211/¢,(54.6cm).
Align the anti-tip bracket to the marks
on the floor so the side of the bracket
lines up with the side of the cabinet
mark, and the "V" notches on the anti-
tip bracket line up with the end of the
211/¢,(54.6cm) line (Rearof cabinet line).
Fasten the anti-tip bracket to the floor
using the supplied screw.
Slide the cabinet back into position,
making sure the rear cabinet leveling
leg slides under the anti-tip bracket
engaging the slot.
_nti-l
rack
Floor Mount InstaBation
The anti-tip bracket is to be located on the
floor in the left or right rear corner of the
wine cooler,
Step by step instructions for locating
the position of the bracket:
1 Decide where you want to place the
wine cooler. Slide it into place, being
careful not to damage the floor, leaving 1"
(2.5cm' of clearance from the rear wallto
allOWroom for the anti-tic bracket.
2 Raise the rear _eve,ng egs
approximately 3/4 /6mm to a_o_
engagement w_tntne ant_-tD bracKet
Level tne unit Dy adjusting all tne levemg
egs as ree Jired.Turning tne eve,ng eg
counterclOCKWiSeWl raise tne unit and
ClOCKWISeWill lower the unit.
3 Make sure the wine coo_er _s_ntne
desired _ocauon.[nan mark on the floor
the rearand side corner of the cabinet
Nnere tne am-tic DracKetWill De installed
If the qstallatlon Goesnot allOWmarine
(54.[cm)
r Leveling Leg
Bottom View of
Wine Cooler
--h_
C
"\ .... L"
Front of
cabinet
Rear Leveling leg
"V" notches
in bracket
_21 1/2"
(54.6cm)
' notches
Loading ...
Loading ...
Loading ...