Loading ...
Loading ...
Loading ...
3.1-5
3.1-5
A
DC
B
3.2-1
6
3. Installation
3.1-5
Reduced-Depth Mounting: Use
three screws to attach each of the
two shorter mounting brackets to
the PDU as shown. Mount the PDU
to a stable surface with the outlets
facing upward by inserting two or
more user-supplied screws through
the mounting brackets and into
secure mounting points.
3.2 Connecting the PDU
3.2-1
Input Power Cord Connection:
Attach the cable clamp to the PDU
by inserting the tabs into available
slots on the top and bottom of the
power inlet
A
. Secure the clamp
by sliding it to the right. Attach the
included power cord to the PDU by
inserting the IEC C19 connector
B
of the power cord into the cable
clamp and IEC C20 power inlet
C
.
Install the included screw
D
on
the cable clamp to secure the
power cord connection. Connect
the other end of the input power
cord to a compatible source of AC
power, such as a UPS system, PDU
or utility outlet.
Note: The AC power source should not
share a circuit with a heavy electrical
load.
Note: When connecting the PDU, it
should be provided with over-current
protection and a maximum 20A
branch-rated over-current protection
device.
21-03-420-933682.indb 621-03-420-933682.indb 6 4/5/2021 1:10:23 PM4/5/2021 1:10:23 PM
Loading ...
Loading ...
Loading ...