Loading ...
Loading ...
Loading ...
EN-8
Gently remove dust from the back panel, using a vacuum cleaner
attachment or
similar tool.
BACK PANEL
(Pre- lter)
To maintain optimum performance of this air puri er, please clean the unit including the lter periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
Be sure to remove the power plug from the wall outlet.
SENSORS
1. Remove the Back Panel.
2. Remove the Dust Sensor Filter.
3. If it is very dirty, wash it with water and dry it thoroughly.
Dust sensor
lter
Do not apply excessive pressure, when scrubbing the back panel.
Gently remove dust from the odor sensor,
using a vacuum cleaner attachment or
similar tool.
Dust sensor
Odor sensor
FILTERS
Tag
HEPA Filter
Deodorizing Filter
CAUTION
Gently remove dust from HEPA Filter and Deodorizing Filter with a vacuum
cleaner attachment or similar tool.
Do not WASH in water and DRY in the sun.
The lters are fragile, be careful not to apply too much force.
• HEPA Filter
Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the lter will be damaged.
• Deodorizing Filter
The maintenance can be applied to the both sides.
NOTE How to clean hard to remove dirt
1. Add a small amount of kitchen detergent to water and soak for about 10
minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the lter in a well-ventilated area.
Back
Panel
Odor sensor
Back Panel
CAUTION
OM_FP-J40E_40L_EN.indd 8 2018/06/25 11:44:22
Loading ...
Loading ...
Loading ...