Loading ...
Loading ...
Ⅲ．Parameters(2)
Model
Voltage
Heating
power
Rotational
speed
r/min
The highest
temperature
The maximum
capacity
Heating
plate size
mm
SH-6B
110V/220V
-
100-2000
-
1000ml×4
300×250
SH-7B
-
100-2000
-
3000ml
×
4
400
×
300
Remarks: The voltage is based on the product label.
Ⅳ.Operating instruction (liquid crystal display)
PV means the temperature, when there is no external sensor, it means the furnace plate
temperature, when the external sensor is connected, it means the external sensor temperature.
SV represents the rotational speed, the set state represents the setting rotational speed,
and the non-set state represents the running rotational speed.
If external temperature sensor is not placed in the beaker on the heating plate,
temperature change can't be sensed within ten minutes after the machine powered on，
instrument controller close the heating and show “pot”
1. Place the machine on a horizontal table, and then connect one end of the power cord
to the power jack on the back of the machine base
2. Plug the other end of the power cord into a standard socket.
3. Pay attention to the power switch on the right side of the machine base. The line (-)
means open, and the circle (o) means close.
Loading ...
Loading ...