Loading ...
Loading ...
Loading ...
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown
to meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION: Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING: Read the warning
instructions that follow before you use the
product.
• This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others.
• It is very important that you read and understand
the contents of this operator’s manual. If you feel
uncertainty about a work situation or the operating
procedures after you read the operator's manual,
speak to a service agent before you continue.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Do not use a product that appears
to have been modified by others and only use
accessories recommended for this product. Non-
authorized modifications and/or accessories can
result in serious personal injury or the death of the
operator or others.
• Do a check of the product before use. Refer to
Safety devices on the product on page 6
and
Safety devices on the product on page 6
. Do not
use a product that is damaged or does not operate
correctly. Do the safety checks, maintenance and
service instructions described in this manual.
• A used muffler/spark arrester and spark arrester
mounting face may contain deposits of combustion
particles that may be carcinogenic. Avoid being
exposed to these compounds when handling the
muffler and /or spark arrester. Prior to any handling
of the muffler and/or the spark arrester, refer to
To
do a check of the muffler on page 7
.
Safety instructions for assembly
WARNING: Read, understand and
obey these instructions carefully before you
use the product.
• The complete clutch cover and shaft must be fitted
before the machine is started, otherwise the clutch
can come loose and cause personal injury.
• The only accessories you can operate with this
product are the cutting attachments we recommend.
Refer to
Accessories on page 24
.
• Use approved protective gloves.
• Make sure that you assemble the protective cover
and shaft correctly before you start the engine.
4
703 - 009 - 04.09.2023
Loading ...
Loading ...
Loading ...