Loading ...
Loading ...
Loading ...
8
1. Control Panel
2. Air Outlet
3. Caster
4. Air Intake
5. Filter
6. Fastener
7. Air Intake
8. Handle
9. Plug Storage Area
10. Power cord cover
11. Drain Port
12. Power supply
13. Drain Cover and Plug
14. Remote Control
15. Connector
16. Exhaust Hose
17. Adapter
18. Window kits
19. Window kits screw
(butterfly nut)
INSATALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
TOOLS NEEDED
•Flat-blade Screwdriver
•Phillips Screwdriver
LOCATION REQUIREMENTS
Place the air conditioner on a flat, level surface in a location that is at least 50cm from any wall.
NOTE: A minimum clearance of 50cm from the air conditioner to the wall must be maintained to ensure proper airflow.
Maintain a minimum 50cm clearance around the air conditioner to not block airflow.
Keep the air conditioner free of any obstructions such as drapes, curtains, blinds, etc.
The exhaust hose should be free of any obstructions.
Do not place the air conditioner on an unstable or raised surface because it could fall and cause damage or injury.
Do not place the air conditioner in direct sunlight or near a heat source such as baseboard heaters, stoves, etc.
The window panel can be installed in a window with a minimum 50 cm to a maximum 102 cm opening.
Loading ...
Loading ...
Loading ...