Loading ...
Loading ...
Loading ...
2525
• By switching on the second element (g. 2.3), the surface area of the double zone can
be extended.
To turn on both zones, turn the control knob fully clockwise to the position .
Note: if you leave the knob at the position , the full double element will remain at
the highest heat setting.
To reduce the heat of the full double element, turn its knob anticlockwise to setting
“12” or lower.
Adjust the heat during cooking as necessary.
• To return to using only the inner zone of the double element, rst turn the knob to the
“0“ (o) position (you should feel a click) and then clockwise to a setting from “1” to
“12”.
Check that the hob is clean and then switch on by turning the control knob.
When the hob is working, the pilot light will be on.
Hi-light double radiant zone
Second element
Fig. 2.3
4
5
7
6
8
1
1
3
2
9
Fig. 2.4
Attention: Detach the appliance from the mains if the ceramic glass is cracked and
contact the After-Sales Service.
Caution!
The cooking hob becomes very hot during operation.
Keep children well out of reach.
Never cook the food directly on the glass ceramic cooktop, but in special pans or
containers.
Metallic objects such as knives, forks, spoons and lids should not be placed on the
hob surface since they can get hot.
WARNING: Hobs become very hot with use, and retain their heat for a long time
after cooking has nished (about 30 minutes).
Children should be supervised at all times and be prevented from touching the hot
surfaces, until such time as the appliance has cooled.
Loading ...
Loading ...
Loading ...