Loading ...
Loading ...
Loading ...
7. PREPARINGABEVERAGE
7. 1 ONE CAPSULE (E. G. LUNGO)
1
Adjust the drip tray position. Place the cup with the correct
cup size on the drip tray. See "BEVERAGE EXAMPLES" or
package. Check ifthe water tank contains enough fresh
drinking water.
2
Open the locking handle. The machine switches on
automatically. The temperature selection icon blinks while
the machine is heating up for approximately 40 seconds.
Afterwards, the temperature selection icon lights steady
red. The machine is ready to be used.
3
Make sure the rinsing tool is notinside. Insert the capsule
in the capsule holder. Insert it back into the machine. Close
the locking handle.
4
Use the touch volume selector to illuminate the amount of
bars in accordance with the number of bars shown onthe
capsule, or select the amount of bars to your owntaste.
Choose XL beverage for an extra big cup. Wait around 1.5
min if you want to prepare a second extra bigcup.
5
Touch the start/stop icon. The beverage preparationstarts.
Do not open the locking handle during the extraction. Wait
until the extractionstops. The machine stops the
preparationautomatically. The extractioncan be stoppedat
any time manually by pressing the start/stop icon.
6
After finishing the preparation, the temperature selection
icon and the bar display light blink for up to 8 seconds.
During that time do not open the locking handle!
7
After the extraction is finished openthe locking handle.
Remove the cup from the drip tray.
8
Pull out the capsule holder. Remove the used capsule. Put
the used capsule in the dustbin.
9
Rinse both sides ofthe capsule holder with freshdrinking
water. Dry the capsule holder. Insert it back into the
machine. Enjoy your beverage!
14
Loading ...
Loading ...
Loading ...