Loading ...
Loading ...
Loading ...
51
Lamp (continued)
$ODPSKDVD¿QLWHSURGXFWOLIH8VLQJWKHODPSIRUORQJSHULRGVRIWLPHFRXOG
cause the pictures darker or the color tone poor. Note that each lamp has a
different lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended.
To prepare a new lamp, contact your dealer and tell the lamp type number.
Type number = 78-6969-9875-2
1.
Turn the projector off, and unplug the power cord. Allow the lamp to cool for
at least 45 minutes.
2.
Prepare a new lamp.
If the projector is mounted on the ceiling, or if the lamp has broken, also ask
the dealer to replace the lamp.
In the case of replacement by yourself,
3.
Loosen the lamp door screw (marked by arrow) and
then slide the lamp door to the side to remove it.
4.
Loosen the 2 screws (marked by arrow) of the
lamp, and slowly pick up the lamp by the handles.
5.
,QVHUWWKHQHZODPSDQGUHWLJKWHQ¿UPO\WKHWZR
screws that are loosened in the previous process
to lock it in place.
6.
6OLGHWKHODPSGRRUEDFNLQSODFHDQG¿UPO\IDVWHQ
the lamp door a screw.
7.
Turn the projector on and reset the lamp time
using the LAMP TIME function in the OPTION
menu
(
41)
.
(1) Press the MENU button to display a menu. Only
when the EASY MENU has appeared, please
perform the next step (2).
(2) Point at the “Go to Advanced Menu …” in the menu
XVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ
(3) Point at the “OPTION” in the left column of the
PHQXXVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ
3RLQWDWWKH´/$037,0(´XVLQJźŸEXWWRQWKHQ
SUHVVWKHŹEXWWRQ$GLDORJZLOODSSHDU
3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKH
dialog. It performs resetting the lamp time.
Maintenance
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
Lamp door
Screw
Handle
Screws
3M™ Digital Projector X62
© 3M 2006. All Rights Reserved.
Loading ...
Loading ...
Loading ...