Loading ...
Loading ...
Loading ...
USE
WATER HARDNESS TABLE
Level
Grains per
gallon
French dF Indicator
1
0-5 gpg
0–9
SL1 is
shown on
the display.
2
6-12 gpg
10-20
SL2 is
shown on
the display.
3
13-18 gpg
21-30
SL3 is
shown on
the display.
4
19-23 gpg
31-40
SL4 is
shown on
the display.
5
24-32 gpg
41-60
SL5 is
shown on
the display.
6
33-53 gpg
61-90
SL6 is
shown on
the display.
Adjust the water hardness setting of your machine
according to the level specified on the test strip (if
available).
In order to change the water hardness level, follow the
steps below:
1) Turn on the machine and press the Extra Dry button for
3 seconds to enter Menu settings: the water hardness
level will appear on the display (SL1 is the factory
setting)
2) press the Half Load button once and the water hardness
level (e.g. SL1) will start flashing
3) Change the water hardness level by pressing the Delay
buttons
4) Press the Half Load button again to save desired level:
the newly selected level will stop flashing
5) Exit Menu settings by pressing the Extra Dry button for 3
seconds or turn the machine off.
WARNING
In order for the water softening system to
work properly, the dishwasher must be
filled with dishwasher salt before the first
wash. See instructions in the salt dispenser
chapter.
PLATE ARRANGEMENT
If you place your dishes into the machine properly, you will
be using it in the best way in terms of energy consumption,
washing and drying performance.
Into the lower basket, you can load round and deep items
such as pots with long handles, pot lids, plates, salad
plates, cutlery sets. The upper basket has been designed
for dessert plates, salad bowls, cups and glasses. When
placing long stem glasses and goblets, lean them against
the basket edge, rack or glass supporter wire and not
against other items. Do not lean long glasses against one
another or they will lose their balance and may be
damaged. It is more appropriate to place thin narrow parts
into the middle sections of baskets. You can place spoons
among other cutlery sets in order to prevent them from
sticking to one another.
We recommend that you use the cutlery grid for best
results. To avoid possible injury, always place long-handled
and sharp-pointed utensils such as serving forks, bread
knives, etc., with their sharp points facing downwards or
horizontally on the baskets.
WARNING
Place your dishes into your machine so that
they will not prevent the upper and lower
spray arms from spinning.
WARNING
Do not put into the appliance items that can
absorb water (sponges, dishcloths).
NOTE
Place all containers such as cups, glasses
and pots into the dishwasher with the
opening facing downwards (so that they
cannot collect water).
NOTE
Dishes and cutlery should not be placed
above one another.
NOTE
Do not overload your dishwasher and pay
attention to manufacturer instructions
regarding dishes which are appropriate for
use in a dishwasher. Only with suitable
dishes (mentioned in section 5) will you
obtain optimal washing results with a
sensible use of energy.
High temperature water and dishwasher
detergent may form a chemical synthesis
that can damage certain items.
24
Loading ...
Loading ...
Loading ...