Loading ...
Loading ...
Loading ...
ASSEMBLY
WARNING:
Before
attempting any of the assembly steps
below, ensure product is switched off and
disconnected from the power supply.
ASSEMBLY FOR BLOW MODE
BLOW TUBE ASSEMBLY (FIGURES A-D)
•Fitfancover(13)asshowninfigure A
until audible click is heard.
CAUTION: CUT HAZARD.
Ensure fan cover (13) is securely seated
and latched into position.
NOTE: Unit will not operate in blow mode
without fan cover in place.
Align the upper and lower tubes as
shown in figure A.
•Pushthelowertubefirmlyintotheupper
tube, until the tubes click into place.
•Blowtubesmustbeassembledtothe
power head before use.
•Neveroperatewithoutbothlowerand
upper tubes assembled.
•Intheinterestofsafety,itisnotintendedfor
the tubes to be separated once assembled.
•Pushthetubeassemblyontothepower
head until it is in the fully locked in position
and an audible click is heard. (figure B).
CAUTION:
CUT HAZARD.
Ensure the tube assembly is securely seated
and latched into position.
•Usetheairconcentratorattachmentto
target air flow to a tighter area. Add the
attachment to the assembly as shown
in figure C. Push on until hole in tab
engages raised post on tube.
•Usetheleafblasterattachmenttorapidly
move air back and forth to remove
stubborn debris from grassy areas. Add
the tube to the assembly as shown
in figure D. Push on until hole in tab
engages raised post on tube. To lock the
leaf blaster attachment and reduce the
back and forth motion, push forward on
the locking tab.
ASSEMBLY FOR VACUUM MODE
REUSABLE BAG (FIGURE E)
•Attachtheshouldercollectionbagto
the power head as shown in figure E.
•Ifneeded,attachdetachablestrapto
bag as shown in figure F.
NOTE: BV6000 and BV6600 are supplied
with a detachable strap that can be used
with both reusable and disposable bags.
DISPOSABLE BAG (FIGURE G) -
BV6000 & BV6600 ONLY
NOTE: Disposable bags are designed for
single use only. Do not empty and reuse.
NOTE: Store bags in a cool, dry location,
do not expose to rain or wet environments
•Attachdisposablebagtodiffuseras
shown in figure G.
•Slideopeningofthebagaroundthe
diffuser so the elastic part of the bag sits
inside the grooves of the collar (G1).
•Wrapthediffuserstrap(G2) around the
opening of the bag and fasten the velcro
to securely attach the bag to the diffuser.
•Attachthediffusertothepowerhead
as shown in figure E.
•Attachdetachablestraptobagas
shown in figure F.
VACUUM TUBE ASSEMBLY (FIGURES H-J)
•Vacuumtubesmustbeassembled
together before use.
•Alignthenotchesandthetriangleson
upper and lower tubes. (figure H)
•Pushthelowertubefirmlyintotheupper
tube, until the triangles click into place.
(Never operate apart).
•Intheinterestofsafety,itisnotintendedfor
the tubes to be separated once assembled.
•Removethefancover(13)fromthe
bottom of the power head by pressing the
spring loaded release button (located on
the back of the power head) and pulling
the cover off (figure I).
•Attachthevacuumtubeassemblytothe
power head (figure J) by locating the
assembly as indicated by arrow, then
pivot about this point until the locking/
release catch is fully engaged.
REMOVING BLOW TUBE, VAC TUBE OR
COLLECTION BAG (FIGURE I & K)
•Toremovetheblowtube,vactubeor
shoulder collection bag, depress the
release button on the power head and
pull straight off (figure I & K).
OPERATION
USE AS A BLOWER:
ALWAYS WEAR SAFETY GLASSES.
WEAR A FILTER MASK IF THE
OPERATION IS DUSTY. USE OF
RUBBER GLOVES AND SUBSTANTIAL
FOOTWEAR IS RECOMMENDED
WHEN WORKING OUTDOORS. FOR
HOUSEHOLD USE ONLY.
WARNING:
CUT
HAZARD. When turning the tool off for
tube installation or any other reason, wait
10 seconds for the fan to stop rotating
before disassembly.
•Donotuseinvacuummodewithoutthe
vacuum tubes and collection bag in place.
•Alwaysswitchoffandremovetheplug
from the electrical supply when:
•Changingfromblowertovacuumor
back.
•Thepowersupplycordhasbecome
damaged or entangled.
•Youleaveblower/vacunattended.
•Clearingablockage.
•Checking,adjusting,cleaningor
working on blower/vac.
•Useblower/vaconlyindaylightorgood
artificial light.
ON/OFF SWITCH (FIGURE L)
BV5600 & BV6000
Your blower/vac is fitted with a two speed
switch located on the top of the power
head below the handle.
•Touseinlowspeed,rotatetheknob
clockwise to Position I. To use in high
speed, rotate the knob clockwise to
Position II.
•ToturntoolOFF,rotatetheknob
counterclockwise to the off position (0).
CORD RETAINER (FIGURE M)
•Acordretainerisincorporatedintothe
rear of the power head. It can be used in
two different ways:
•Tousethecordretainerasshownin
figure M1, hook the extension cord under
the retainer. Then plug the cord from the
power head into the extension cord.
•Tousethecordretainerasshownin
figure M2, loop the extension cord over
the power head cord and plug the two
ends into each other. Then hook the
extension cord under the retainer.
BV6600
Your blower/vac is fitted with a variable
speed switch located on the top of the
power head below the handle.
•ToturnthetoolON,rotatetheknob
clockwise. The further the knob is
rotated, the higher the air speed.
•ToturntoolOFF,rotatetheknob
counterclockwise to the off position (0).
USE AS A BLOWER (FIGURE N)
WARNING:
Ensure product
is switched off and disconnected from the
power supply.
•Fitfancover(13)asshowninfigure A
until audible click is heard.
CAUTION: CUT HAZARD.
Ensure fan cover (13) is securely seated
and latched into position.
•Attachtheblowtubeassemblytothe
power head as shown in figure B.
•Connectthecordonthepowerheadto
the power supply (figure M).
•Holdtheblowtubeapproximately7
inches (180mm) above the ground, turn
the blower/vac on and using a sweeping
motion from side to side, advance slowly
keeping the accumulated debris/leaves in
front of you as shown in figure N.
•Onceyouhaveblownthedebris/leaves
into a pile, you can convert to vacuum
mode to collect the debris.
•Usingtheairconcentratorwillhelp
remove matted debris and leaves.
•Usingtheleafblasterattachmentwill
help move air back and forth to remove
stubborn debris from grassy areas.
USE AS A VACUUM:
VACUUM MODE (FIGURE O)
WARNING:
Ensure
product is switched off and disconnected
from the power supply.
To fit the leaf collection bag assembly to
product:
•Removeblowtube.
•Toassemblethedisposablebagtothe
power head refer to the “Assembly”
section.
•Removethefancover(13)fromthe
bottom of the power head by pressing the
spring loaded release button (located on
the back of the power head) and pulling
the cover off (figure I).
•Attachthevacuumtubeassemblytothe
power head (figure J) by locating the
assembly as indicated by arrow, then
pivot about this point until the locking/
release catch is fully engaged
and an
audible click is heard.
.
CAUTION:
CUT HAZARD.
`
Ensure the vacuum tube assembly is
securely seated and latched into position.
•Connectthecordonthepowerheadto
the power supply (figure M).
•Positionthetubeslightlyabovethedebris/
leaves. Turn the blower/vac on, then using
a sweeping motion the debris/leaves will be
sucked up the tube, mulched and deposited
into the collection bag (figure O) .
As the bag fills the power of the suction
will decrease, turn the blower/vac off and
unplug from power supply.
EMPTYING REUSABLE BAG
(FIGURES Q-R)
CAUTION:
NEVER
REMOVE THE COLLECTION BAG
WITHOUT FIRST TURNING OFF AND
UNPLUGGING THE VACUUM.
BV6600
•Emptythereusableleafcollectionbagby
sliding the retaining bar off the bottom of
the bag as shown in figure Q.
NOTE: If the suction decreases and the bag
is not full, the vacuum tube is probably clogged
with debris. Turn off and unplug the blower/vac
and clear the tube before continuing.
•Toreattachtheretainingbar,closethe
bottom of the shoulder bag by folding the
bi-folds flat as shown in figure R. Slide the
retaining bar over the closed bag.
BV5600 & BV6000:
As bag fills, suction power will decrease.
Switch off product and unplug from power
supply. Unzip reusable bag to empty and
re-zip before continuing to operate,
DISPOSING OF DISPOSABLE BAG
BV6000 & BV6600 (FIGURE T)
WARNING:
Do Not Burn.
Do Not Re-use.
NOTE: Ensure elastic is removed before
disposing of bag.
•Toremovethedisposablebag,undothe
diffuser strap and slide the bag off of the
diffuser.
•Pullelasticthroughtheholeintheneck
of the bag, cut the elastic, and remove
it from the bag. Tie the rope tightly
to ensure the bag is sealed before
disposing of it (figure T).
•Placeanotherdisposablebagonthe
diffuser before using the blower/vac again.
NOTES:
•Disposeoffbagaccordingtolocalregulations.
•Storeinacool,drylocation,donot
expose to rain or wet environments.
•Disposeofwithin6monthsoffirstuse.
Disposable Bag Components:
NOTE: Disposable bag is compostable.
•Fabric100%PolyacticAcid
•Thread100%Cotton
•Tie3mmHempRope
RAKE (FIGURE P)
BV6600 is supplied with a rake to pull
debris/leaves into piles for easier collection
when using vacuum mode.
•Attachtherakeaccessorytothelower
vac tube as shown in figure P.
•Withtheblower/vacoff,useasimpleraking
motion to collect debris/leaves into a pile.
•Turnonunittovacuumupthepileof
debris/leaves.
MAINTENANCE
CLEANING AND STORAGE
TURN OFF AND UNPLUG TOOL! (Unplug
extension cord at power source.)
Use only mild soap and a damp cloth to
clean the tool. Never let any liquid get inside
the tool; never immerse any part of the tool
into a liquid. Clean out any clippings which
may have accumulated in the Blower/Vac.
When used properly with dry leaves the fan
chamber of your Blower/Vac should remain
clean. If damp earth and debris are ingested
some of the particles may build up on the
inside of the fan chamber. If this happens
the performance of the unit will decrease.
This area can be cleaned out using a
wooden stick as shown in figure S after
disconnecting from the power source. Your
Blower/Vac should be stored in a dry place.
WARNING:
SHOCK
HAZARD. DO NOT POUR OR SPRAY
WATER ON THE TOOL IN AN ATTEMPT
TO CLEAN.
Do not store the tool on or adjacent to
fertilizers or chemicals. Such storage can
cause rapid corrosion of the metal parts.
IMPORTANT: To assure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than
those listed in this manual) should be
performed by authorized service centers or
other qualified service personnel, always
using identical replacement parts.
ACCESSORIES
WARNING:
The use of any
accessory not recommended for use with
this tool could be hazardous.
Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
SERVICE INFORMATION
All BLACK+DECKER Service Centers
are staffed with trained personnel to
provide customers with efficient and
reliable power tool service. Whether you
need technical advice, repair, or genuine
factory replacement parts, contact the
BLACK+DECKER location nearest you. To
find your local service location, call: 1-800-
544-6986 or visit www.blackanddecker.com
Two-YEAR LIMITED wARRAnTY
BLACK & DECKER (U.S.) Inc. warranties this
product to be free from defects in material
or workmanship for a period of two (2) years
following the date of purchase, provided that
the product is used in a home environment.
This limited warranty does not cover failures
due to abuse, accidental damage or when
repairs have been made or attempted by
anyone other than BLACK+DECKER and
its Authorized Service Centers. A defective
product meeting the warranty conditions set
forth herein will be replaced or repaired at
no charge in either of two ways: The first,
which will result in exchanges only, is to
return the product to the retailer from whom
it was purchased (provided that the store is
K
M
O
Q
P
N
L
R
S
T
M1 M2
I J
BV6600 Only, BV6600 Seulement, Solo BV6600
Loading ...
Loading ...
Loading ...