Loading ...
Loading ...
Loading ...
21INSTALLATION
ENGLISH
CAUTION
• Tighten the door adjustment screws completely.
• Adjust the spring strength properly. If you do
not adjust the spring strength, the door may fall
open or spring closed unexpectedly.
• Tightening harder than 15 kgf may result in a
crack in the screw boss.
a Max. 15kgf
Preparing Cabinet Panel
1 Mark a center line lengthwise down the back
of the cabinet panel.
2 Align the top and center line on the
installation template with the top and center
line of the cabinet panel. Securely tape the
installation template to the back of the
cabinet panel.
3 Use a 1/16" (2 mm) diameter drill bit to drill 3/
8" (10 mm) deep pilot holes at the 12 points
marked on the template.
4 Remove the template, and attach the upper
and middle panel brackets (provided) to the
cabinet panel using the provided wood
screws.
5 Attach the lower panel brackets (provided) to
the cabinet panel using the provided wood
screws.
E
Y
Y
3/8 "
(10 mm)
Ø 1/16 "
(2 mm)
en-us_main.book.book Page 21 Thursday, November 10, 2022 8:14 AM
Loading ...
Loading ...
Loading ...