Loading ...
Loading ...
Loading ...
7
Pre-Installation (continued)
UNPACK THE AIR CONDITIONER
WARNING: Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
IMPORTANT:
□ Save these instructions for local inspector’s use.
□ Observe all governing codes and ordinances.
NOTE: Installer, be sure to leave these instructions with
the Consumer.
NOTE: Consumer, keep these instructions for future
reference.
□ Skill level: Installation of this appliance requires basic mechanical skills.
□ Completion time: Approximately 1 hour.
□ We recommend that two people install this product.
□ Proper installation is the responsibility of the installer.
□ Product failure due to improper installation is not covered under the warranty.
□ You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air
conditioner.
IMPORTANT: Observe all governing codes and
ordinances.
Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything
necessary for correct installation.
□ Do not use an extension cord. The appliance shall be installed in accordance with national wiring regulations.
□ Free movement of air in room to be cooled.
□ A large enough opening for the air conditioner.
Remove packaging materials
□ Remove and dispose of/recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air
conditioner. Rub a small amount of liquid dish soap over the adhesive with your ngers. Wipe with warm water and dry.
□ Do not use sharp instruments, rubbing alcohol, ammable uids, or abrasive cleaners to remove tape or glue. These products can
damage the surface of your air conditioner.
□ Handle the air conditioner gently.
□ Remove top rail from the packaging material.
LOCATION REQUIREMENTS
Before you Begin
Read these instructions completely and carefully.
Loading ...
Loading ...
Loading ...