SLOW JUICER
User guide.
2
PERSONAL SAFETY
AVOID CONTACT WITH
MOVING PARTS
JUICER SCREEN IS SHARP!
HANDLE CAREFULLY TAKE
CAUTION WHEN ASSEMBLING,
DISASSEMBLING, AND DURING
CLEANING
This juicer system has moving
parts, and is not intended for
use by children or persons with
reduced physical, sensory,
or mental capabilities,
or who lack experience
and knowledge of its safe
operation. Such persons
require close supervision and
thorough instruction on its
proper use and safe operation.
Close supervision is necessary
when any appliance is used
Important safeguards &
cautionary information.
Warning! To avoid the risk of serious injury, carefully
read all instructions before operating your NutriBullet
®
Slow Juicer. When using any electrical appliance, basic
safety precautions should always be observed, including
the following important information.
by or near children. Children
should be supervised to
ensure that they do not play
with the appliance. Keep
cord out of reach of children.
This appliance is not a toy.
To protect against fire,
electrical shock and injury to
persons, do not immerse the
appliance, motor base, cord,
or plug in water or any other
liquid.
The use of attachments not
recommended or sold by
NutriBullet
®
may cause fire,
electric shock, or injury.
This appliance is for household
use only. Do not use this
appliance for anything other
than its intended use. Do not
use outdoors. Misuse may
cause injury.
WARNING!
WARNING!
Save these instructions!
FOR HOUSEHOLD USE ONLY
!
3
DO NOT LEAVE THE APPLIANCE
UNATTENDED WHEN IN USE
Keep hands, fingers, hair,
clothing, as well as spatulas
and other utensils, away from
the feed chute opening during
operation.
Do not push food into the feed
chute with your fingers or utensils.
Always use the food pusher
provided. Do not place hand or
fingers into the feed chute when
it is attached to the appliance.
If food becomes lodged in the
feed chute, use the food pusher
provided to push it down.
To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug of
this appliance.
PRODUCT SAFETY
Always make sure the juice bowl
cover is securely in place and
locked to the juice bowl before
the motor is turned on.
Do not attempt to unlock the
juice bowl cover from the
juice bowl while the juicer is
in operation.
Always make sure the juicer
is properly and completely
assembled before connecting to
a power outlet and operating.
Do not use appliance if the
auger is damaged.
Do not operate juicer for more
than 15 minutes at a time when
juicing at a rapid rate or with
firm pressure. Allow the motor to
rest for 1 (one) minute between
each use.
This juicer is only designed to
juice fresh fruits and vegetables.
Do not use any frozen fruits or
vegetables.
Do not juice stone fruit unless
pits of the seed stone has been
removed.
Ensure that the surface where
the appliance operates is stable,
level, clean, and dry.
Do not put any NON-food items
into the feed chute.
4
Vibration may occur during
normal operation.
Any significant spillage onto the
surface under or around the
appliance, or onto the appliance
itself, should be cleaned and
dried before continuing to use
the appliance.
When using this appliance,
provide adequate air space, at
least 200mm, above and on all
sides for circulation.
Do not operate any appliance
with a damaged cord or
plug or after the appliance
malfunctions, or is dropped or
damaged in any manner.
Unplug from outlet when not in
use, before putting on or taking
o parts, and before cleaning
or attempting to move the
appliance.
To unplug, grasp the plug and
pull from the outlet. Never pull
from the power cord.
Regularly inspect the power
cord, plug, and entire appliance
for any damage.
Do not let the power cord hang
over the edge of a table or
countertop.
Do not let the power cord touch
hot surfaces, including stove, or
become knotted or tangled.
Remove and safely discard
any packaging material or
promotional labels before using
the juicer for the first time.
Keep the appliance clean. Refer
to the Care and Cleaning section
for tips and best practices.
Do not attempt to repair or
service this juicer yourself.
Contact NutriBullet
®
Customer
Service for assistance.
!
If any of the contained
instructions or warnings
are not understood, please
contact NutriBullet
®
Customer
Service for assistance at
www.bulletbrands.com.au /
www.bulletbrands.co.nz. Or call
the Customer Service team at:
1300 285 538 (AUS) / 0800 232
633 (NZ).
5
6
Contents.
Thank you for purchasing the NutrBullet
®
Slow Juicer.
08 What’s included
09 Assembly Guide
10 Before first use
11 Assembly
14 Usage instructions
17 Juicing tips
19 Troubleshooting
20 Disassembly
22 Care and maintenance
23 Replacement parts
23 How to store
24 NutriBullet
®
Slow Juicer one-year
limited warranty
8
What’s included.
150 WATT MOTOR BASE JUICE BOWL
JUICE BOWL COVER
JUICING SCREENSTEELTIPPED AUGER
CLEANING BRUSHPULP
CONTAINER
ROTATING BOWL
BRUSH
FOOD PUSHER700 ML JUICE
CONTAINER
9
Assembly guide.
food pusher
grinding assembly
rotating bowl brush
juice bowl
with Juice Spout and spout
cover, and Pulp Spout
cleaning brush
power switch
pulp container
juice
container
150 watt motor base
juice bowl cover
with Feed Chute
and Juice Bowl Lid
auger
juicing screen
10
Before first use.
Before using your juicer for the first time, please take a moment to
perform the steps below.
UNPACK
Open the box and remove the appliance with its various
components, placing all parts on a flat, level surface.
SEPARATE
A few parts will be packed together. Separate them using the
following 3 steps (see image):
a. Lifting up, remove Grinding Assembly and Rotating Bowl Brush together
from the Juice Bowl.
b. Detach Rotating Bowl Brush by moving it down.
c. Lifting up, remove the Auger from Juicing Screen.
CLEAN
Immerse all detachable parts and accessories (not the base) in
warm, soapy water. Rinse and dry.
Clean the outside of the base with a clean, damp cloth.
WARNING: Never submerge the Motor Base in water or any other liquid.
(a)
(b)(a)
(c)
11
Assembly.
1 Before starting assembly,
check that the appliance
is unplugged and the
power switch is off.
2 Check the position of the
pulp plug. Look at the
bottom of the Juice Bowl.
Make sure the pulp plug is
positioned properly in the
pulp spout (see image).
4 Put the Juice Screen into
the Rotating Bowl Brush.
3 Attach Juice Bowl to Motor
Base. Position the Juice
Bowl on top of the Motor
Base and push downwards,
making sure the bowl is
tightly fastened to the base
and locked securely in
place. The Juice Bowl must
be attached in its proper
position or the appliance
will not operate.
12
6 Put the Auger into the
strainer and ensure
the Auger is positioned
properly onto the center
axis. Turn and press down
on the head until it is
seated securely into place.
7 Place the Juice Bowl Cover
on top of the Juice Bowl,
making sure the “unlocked”
symbol on the lid aligns with
the arrow symbol on the
bowl. Rotate cover clockwise
to lock it in place.
NOTE: To ensure the Juice Bowl
Cover is fully locked, rotate it until
the “locked” symbol on the Juice
Bowl Cover aligns with the up-
triangle symbol on the Juice Bowl
(see closeup image).
Make sure the Juice Bowl Cover
is fully locked in position, or the
appliance will not operate. (To
remove the Juice Bowl Cover
from the Juice Bowl, rotate it
counter-clockwise.)
5 Place the screen and
brush assembly into the
Juice Bowl.
NOTE: You may need to turn it
slightly before it seats properly.
13
8 Place Juice and Pulp
Containers under spouts.
8a Position the Juice Container
below the juice spout, this is
on the right side of the Juice
Bowl with the spout cover.
8b Place the Pulp Container
below the pulp spout.
NOTE: The juice and Pulp
Containers must be in their proper
positions before juicing. During
operation, juice will flow into the
Juice Container from the juice
spout, while pulp will be ejected
from the pulp spout and collected
by the Pulp Container.
9 Put the Food Pusher into the
feed chute. The juicer is now
ready to operate.
14
Usage instructions.
1 Prepare foods for juicing,
and make sure non-
juiceable foods are not used.
• Remove any hard seeds, pits,
and skin – for example, peel
and pits should be removed
from oranges, lemons,
grapefruits, and melons.
• Cut foods into smaller pieces
if needed to fit into the feed
chute.
• Do not attempt to process
thick or hard foods that
don’t contain any juice
to extract (for example,
it is not recommended to
process bananas, avocados,
coconuts, or similar hard
foods, since these may
damage the motor).
2 Before plugging the power
cord into an outlet, make
sure the power switch is in
the “OFF” position.
3 The power switch has three
settings. Pressing the power
switch to the “ON” position
activates the motor and
starts making juice; pressing
the power switch to “OFF”
turns o the machine;
and “REV” means reverse
rotation, only used when
something is stuck and you
need to unclog the unit.
15
4 Make sure the juice and
Pulp Containers are in their
proper positions.
5 Plug the juicer into the
power outlet, then press
the power switch to the
“ON” position.
6 Drop the prepared fruits
or vegetables into the feed
chute and gently push
the items down into the
grinding assembly, using
the Food Pusher.
CAUTION: Never place
your finger or hand into the
feed chute. Always use the
food pusher provided.
6a The appliance will start to
process the food items. After
a few moments, the juice will
flow out.
NOTE: For ecient juicing,
alternate feeding soft foods and
harder foods into the feed chute.
For example, follow leafy greens
with an apple slice, or orange with
a carrot. The harder produce will
help with processing the softer
produce and extract more juice.
CAUTION: The auger must stop
rotating before changing from "ON"
to "REV". Do not turn the power switch
from "ON" to "REV" or from "REV" to "ON"
without pressing the power switch to
"OFF" first. Once the appliance is "OFF"
and has stopped running completely
then turn the power switch from "OFF"
to "REV" or from "OFF" to "ON".
16
7 While you are juicing, you
may choose to open the
wide chute lid, which will
open the chute to 3-inches.
This will accommodate
larger pieces of fruits and
vegetables. When the wide
chute lid is in the open
position, the motor will
pause and the Auger will
stop rotating. After you
have inserted fruits and
vegetables into the large
chute, close the wide chute
lid to restart the motor and
continue juicing.
8 Once the Juice Container
is full, or all food has been
processed, turn the power
switch to “OFF”. If you have
more food to process,
empty the Juice and Pulp
Containers before starting
a new round of juice
extracting.
NOTE: Do not insert too much
food to extract at one time. During
operation, once the Juice Container
is full, you must stop the appliance
and empty the Juice and Pulp
Containers before the next
juicing cycle.
CAUTION: During operation, if the
Juice Bowl Lid is disconnected from
the Juice Bowl, the motor will stop.
17
PROPER PRODUCE PREP
Prepare fruit and veggies
before inserting them into
the juicer:
• Clean produce properly.
Rinse with lukewarm water,
produce wash, or water and
apple cider vinegar.
• Peel or remove skin as
needed. Foods with thick or
hard skin must be peeled
before being put into
the juicer.
• Remove rind from all citrus
fruits before juicing.
• Remove large pits and seeds
from stone fruit before
juicing. Stone fruit may be
used only if the seeds or pits
have been removed. Fruit with
hard cores must be pitted. The
cores of peach, plum, mango,
and apricot should not be put
into the feed chute, to avoid
any potential malfunction.
• Chop food items down to the
right size - small enough to
fit easily into the feed chute,
without having to force pieces
down with the Food Pusher.
Juicing tips.
• Foods with less moisture and
harder fibers: Cut into slices.
• Leafy vegetables and foods
with long, harder fibers (such
as celery and kale): Cut the
stems into 4 inch pieces and
then roll up the leaves well.
• For ecient juicing, alternate
feeding soft foods and hard
foods into the feed chute.
For example, follow leafy
greens with an apple slice, or
an orange with a carrot. The
harder produce will help with
processing the softer produce
and extract more juice.
• Frozen food items can be
put in the juicer after being
defrosted.
FEED CHUTE
• Never place your hand,
fingers, utensils, or other
foreign objects into the feed
chute while it is attached to
the appliance.
• Do not overload the feed
chute. Insert food gradually,
at a pace the juicer can
keep up with.
• Use only the provided Food
Pusher to push food into
18
the feed chute. Never use
fingers, utensils, or any other
apparatus.
• Never use excessive force to
push items into the feed chute.
• After inserting food, ensure
all items have moved down
the feed chute before
adding more.
• If any food gets stuck in the
feed chute, use the Food
Pusher to move it down
the chute.
• For best taste, consume fresh
juice and pulp within 72 hours
of juicing.
CAUTION: Do not operate the unit
without feeding food into it, to avoid
damaging the grinding assembly.
FOODS THAT CANNOT
BE JUICED:
• Foods that do not contain
juice to extract (for example,
bananas, avocados, coconuts)
• Stone fruits that have large
pits or seeds that have not
been removed
• Hard fruits or thick vegetables
rich in fiber and starch
• Frozen fruits or vegetables
19
PROBLEM: PARTS
ARE DIFFICULT TO
DISASSEMBLE
Solution: After finishing juicing,
in order to detach and clean
parts more easily, continue
to run the juicer for about 30
seconds without adding any
additional food in order to
process any food that might
be stuck in the Auger and
Juicing Screen.
Another tip: after you are done
extracting juice, pouring some
water in the feed chute to clean
it can help make it easier to
disassemble.
PROBLEM:
JUICER IS STUCK
AND WON'T OPERATE
Solution: If the juicer is stuck
and not operable, press the
power switch to the “OFF”
position. Then press the
RESET switch, which is located
at the bottom of the base
(see image).
Troubleshooting.
Next, press and hold the power
switch in the “REV” position
for few seconds, then try
operating again.
If this reverse function does
not work, turn o the machine,
unplug, and reassemble it,
using the instructions given
earlier in this guide. After
reassembly, try turning on
the machine to see if normal
function has been restored.
PROBLEM: THE JUICER
TURNED OFF IN THE
MIDDLE OF JUICING
If the motor overheats, the
juicer will turn o.
Solution: If the juicer is
overheated and stops working,
unplug it and allow it to cool
down for at least fifteen
minutes before attempting
to use again.
20
Disassembly.
1 Make sure the juicer is
powered OFF, cooled
down completely, and
unplugged before starting
disassembly. Ensure that
the motor has completely
stopped, the grinding
assembly has stopped
moving, and all moving
parts have stopped before
disassembling juicer.
2 Remove the Juice Container
from under the juice spout.
To prevent drips, use the
spout cover to close the
juice spout.
3 Remove the Pulp Container
from under the pulp spout.
4 Twist the Juice Bowl lid
counter-clockwise to
unlock it, then lift to
remove it from the
top of the juicing jar.
21
5 Remove the Auger from
the bowl.
6 Detach and lift the Juice
Bowl (with the Rotating
Bowl Brush, Juicing
Screen, and Auger still
inside) o the top of
the base.
7 Remove the Rotating Bowl
Brush and Juicing Screen
together from the bowl.
8 Detach the Rotating Bowl
Brush from Juicing Screen
moving it downwards.
9 If the Food Pusher is inside
the feed chute, remove it.
22
Cleaning the NutriBullet
®
Slow
Juicer is quick and easy. All parts
(except for the base) can be
cleaned by simply rinsing with
warm soapy water, and most
parts are dishwasher safe. Here
are some tips for cleaning and
best practices.
1 Always make sure the
base is unplugged before
you begin assembly,
disassembly, cleaning,
or storage of the unit.
2 Detach and separate the
parts of the juicer (see
Disassembly section).
3 Empty the Pulp and
Juice Containers (store
or throw away pulp,
store or consume juice).
4 Clean the Juice Bowl
Cover, Food Pusher, Auger,
Juicing Screen, Rotating
Bowl Brush, Juice Bowl,
and the juice and Pulp
Containers under
running water.
CAUTION: Do not use a metal
sponge to clean, it will damage
the machine.
5 Clean all juicer parts,
except for the Motor Base,
in warm, soapy water. Or,
you can put all parts into
the dishwasher except for
the Auger.
CAUTION: ALWAYS clean the
Auger by hand with warm, soapy
water and a soft cloth. The Auger
is not dishwasher safe.
6 The Cleaning Brush can be
used for better cleaning
of the Juicing Screen. The
screen can be cleaned
completely using the small
Cleaning Brush. Use this
brush to scrub the Screen
under running water. Be
sure to properly clean
the screen every time you
juice. Leftover traces of
fruits and vegetables can
cause residue buildup in
the strainer, which can clog
the holes and may prohibit
maximum juice extraction.
CAUTION: The Juice Screen is
sharp, so handle carefully during
cleaning.
7 If you need to clean the
pulp spout, first pull
the pulp plug out of the
pulp spout, then clean it
Care and maintenance.
23
Replacement parts.
To order additional parts
and accessories, please visit
our website or feel free to
contact Customer Service:
www.bulletbrands.com.au /
www.bulletbrands.co.nz.
thoroughly with the narrow
end of the Cleaning Brush.
The narrow end of the
Cleaning Brush is sized so
that it can fit inside of the
pulp spout to help remove
pulp that has been stuck.
Run water through the bowl
and pulp spout to help
remove any remaining pulp.
8 Wipe the outside of the base
with a clean, damp cloth.
WARNING: Never submerge
the Motor Base into water or
other liquid.
How to store.
To save juice for future use,
store it covered in the Juice
Container in your refrigerator.
You can also store pulp
the same way, in the Pulp
Container. For best taste,
consume juice and pulp within
72 hours. Store juicer in a safe
dry place where parts will not
be damaged and won’t cause
harm. When moving the juicer,
always grasp it by the base
(not the Juice Bowl or Juice
Bowl Cover).
9 Let all parts dry
thoroughly, then assemble
and store the appliance
in a dry place. The Juice
Container can be stored
in the Pulp Container.
PRO TIP: Clean your appliance
as soon as possible after juicing.
If allowed to sit, pulp may dry on
one or more parts (such as the
Juicing Screen), which can make
it more dicult to scrub away
residue. If any pulp residue does
cake onto any parts of the unit,
allow those parts to soak in hot
water for 30 minutes, which should
soften the residue and make it
easier to remove.
24
If your product becomes
defective due to faulty
material or workmanship
within a period of 1
year from the date of
purchase, we warrant
to do the following:
• For New Zealand Consumers:
We will replace the product
with a new product, free of
charge, or repair the product
at our cost, at our discretion.
• For Australian Consumers:
Our goods come with
guarantees that cannot
be excluded under the
Australian Consumer
Law. You are entitled to
a replacement or refund
for a major failure and for
compensation for any other
reasonably foreseeable
loss or damage. You are
also entitled to have the
goods repaired or replaced
if the goods fail to be of
acceptable quality and the
failure does not amount to
a major failure.
YOUR WARRANTY
IS SUBJECT TO THE
FOLLOWING CONDITIONS:
• DO NOT operate the
appliance with a damaged
plug or cord, or if the unit has
been dropped, damaged or
dropped in water. To avoid
the risk of electric shock, do
not disassemble or attempt
to repair the appliance
on your own. If the supply
cord is damaged, it must
be replaced by a qualified
electrician in order to avoid
a hazard. Incorrect re-
assembly or repair can cause
a risk of electric shock or
injury to persons when the
appliance is used.
• The item has not been
misused, abused, neglected,
altered, modified or repaired
by anyone.
• The item has been subjected
to fair wear and tear.
• The item has not been used
for trade, professional or
hire purposes.
one (1) year limited
replacement warranty
statement.
25
• The item has not sustained
damage through foreign
objects, substances or accident.
YOUR WARRANTY
DOES NOT COVER:
• Components that are
subject to natural wear and
tear caused by normal use
in accordance with
operating instructions.
• Unauthorised/improper
maintenance/handling or
overload is excluded from
this warranty.
• For guarantee claims, you
will need to submit a proof
of purchase in the form of
a valid receipt that displays
date and place of purchase.
This warranty does not replace
but is in addition to your
statutory rights.
This warranty does not apply
to accessories supplied with
the item.
This warranty applies only to
the original purchaser and
may not be transferred.
Replacement items will
be covered by the limited
warranty for the balance of the
warranty period from the date
of the original purchase.
PLEASE NOTE:
Only the defective product
or parts returned to place of
purchase will be replaced
under this warranty.
NEW ZEALAND
PO Box 100-707
NSMC
Auckland 0745
0800 232633
www.bulletbrands.co.nz
AUSTRALIA
PO Box 574
South Morang
Victoria 3752
1300 285538
www.bulletbrands.com.au
NutriBullet is a registered trademark of CapBran Holdings, LLC.
Copyright © 2021 CapBran Holdings, LLC. All rights reserved.
Los Angeles, CA 90025, USA. Made in China.
26
27
www.bulletbrands.com.au / www.bulletbrands.co.nz
NUTRIBULLET
®
is the registered trademark of CAPBRAN HOLDINGS, LLC
Copyright © 2021 CAPBRAN HOLDINGS, LLC. Distributed by
CAPITAL BRANDS DISTRIBUTION, LLC. LOS ANGELES, CA 90025 USA
All Rights Reserved. MADE IN CHINA
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein
are subject to change without notice.
220-240VAC 50-60Hz 150W
210628_NBJ07300 (NBJ-300)
