Loading ...
Loading ...
Loading ...
10
Any other servicing should be performed by an authorized
service representative.
TROUBLESHOOTING
Problem
Possible solution
Juice Extractor will not
work after switching it
on to the “I” position.
The handle (clamp) may not be locked properly in its
position. It must be placed on the grooves of the locking
tabs of the clear cover.
Turn off and unplug unit and ensure all parts are assembled
correctly
Turn off and unplug unit and check if there are residues
blocking the unit
Motor makes loud
noises and vibrates
Turn off and unplug unit. Make sure all parts are assembled
correctly.
Juicing overripe fruits may produce too much pulp and clog
the stainless steel filter. Turn off and unplug unit and clean
the filter.
Motor appears to stall
when juicing
If pulp builds up under the lid, slow down the juicing
process.
Turn off and unplug unit and clean the recollecting ring tray,
the stainless steel filter and the clear cover.
Too much pulp builds
up on stainless steel
filter
Try a slower juicing action by pushing the food pusher down
slower. Remove stainless steel filter and clean thoroughly
with a nylon brush. Rinse the filter basket with hot water. If
the fine mesh holes are blocked, soak the basket in a
solution of hot water with 10% lemon juice to unblock the
mesh. This will remove excess fiber build up (from fruit or
vegetables) that could be reducing the flow of juice.
Juice leaks between
the rim of the Juicer
and clear cover.
Try a slower juicing action by pushing the food pusher down
slower.
Loading ...
Loading ...
Loading ...