Loading ...
Loading ...
Loading ...
Service and Adjustment (cont'd)
Element Cleaning/
Replacement
To remove the element from your tank in order to clean or
replace it:
1. Before beginning turn "OFF" the electric power supply to the
water heater.
•,WARNING ]
The water passin_rain valve may be[
extreme!y hot. To avoid being scalded, make sure all[
connections are tight and that the water flow is[
directed away from any person. I
4. Remove the two screws securing the access panel, and remove
panel.
_WARNING
HAZARD OF ELECTRICAL SHOCKI Before
removing any access panels or servicing the water
heater, make sure the electrical supply to the water
heater is turned "OFF". Failure to do this could
result in DEATH, SERIOUS BODILY INJURY, OR
PROPERTY DAMAGE.
2. Turn off the water supply to the water heater at the water
shutoffvalve or water meter.
5. Remove the insulation block to expose the opemng.
3. Attach a hose to the water heater drain valve and put the
other end in a floor drain or outdoors. Open the water heater
drain valve. Open a nearby hot water faucet which will relieve
pressure in the water heater and speed draining.
15
Loading ...
Loading ...
Loading ...