Loading ...
Loading ...
Loading ...
DJI Mini 3
User Manual
64
©
2022 DJI All Rights Reserved.
Firmware Update
Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft and the remote
controller firmware.
Using DJI Fly
When connecting the aircraft or remote controller to DJI Fly, you will be notified if a new
firmware update is available. To start updating, connect your remote controller or mobile device
to the internet and follow the on-screen instructions. Note that you cannot update the firmware
if the remote controller is not linked to the aircraft. An internet connection is required.
Using DJI Assistant 2 (Consumer Drones Series)
Update the aircraft and remote controller firmware separately using DJI Assistant 2 (Consumer
Drones Series).
Follow the instructions below to update the aircraft firmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) on your computer and log in with your DJI
account.
2. Power on the aircraft and connect the aircraft to the computer via the USB-C port within 20
seconds.
3. Select DJI Mini 3 and click Firmware Updates.
4. Select the firmware version.
5. Wait for the firmware to download. The firmware update will start automatically.
6. Wait for the firmware update to complete.
Follow the instructions below to update the remote controller firmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) on your computer and log in with your DJI
account.
2. Power on the remote controller and connect it to the computer via the USB-C port.
3. Select the corresponding remote controller and click Firmware Updates.
4. Select the firmware version.
5. Wait for the firmware to download. The firmware update will start automatically.
6. Wait for the firmware update to complete.
Make sure to follow all the steps to update the firmware, otherwise the update may
fail.
The firmware update will take approximately 10 minutes. It is normal for the gimbal
to go limp, aircraft status indicators to blink, and the aircraft to reboot. Wait patiently
until the update is complete.
Make sure the computer is connected to the internet during the update.
Before performing an update, make sure both the aircraft and the remote controller
have at least 20% power.
Do not unplug the USB-C cable during an update.
Loading ...
Loading ...