Dji MINI 3 User Manual

Loading ...

DJI Mini 3

User Manual

•

If the aircraft reaches an altitude or radius limit, you can still control the aircraft,

but you cannot fly it any further. If the aircraft flies out of the max radius, it will

automatically fly back within range when the GNSS signal is strong.

•

For safety reasons, do not fly close to airports, highways, railway stations, railway lines,

city centers, or other sensitive areas. Fly the aircraft only within your line of sight.

GEO Zones

All GEO zones are listed on the DJI official website at http://www.dji.com/flysafe. GEO zones are

divided into different categories and include locations such as airports, airfields where manned

aircraft operate at low altitudes, national borders, and sensitive locations such as power plants.

You will receive a prompt in DJI Fly if your aircraft is approaching a GEO zone and the aircraft

will be restricted from flying in the area.

Pre-Flight Checklist

1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully charged.

2. Make sure the gimbal protector is removed.

3. Make sure the aircraft arms are unfolded.

4. Make sure the Intelligent Flight Battery and the propellers are mounted securely.

5. Make sure the gimbal and camera are functioning normally.

6. Make sure that there is nothing obstructing the motors and that they are functioning normally.

7. Make sure that DJI Fly is successfully connected to the aircraft.

8. Make sure all camera lenses and sensors are clean.

9. Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-

DJI certified manufacturers may cause the system to malfunction and compromise safety.

Auto Takeoff/Landing

Auto Takeoff

Use the Auto Takeoff function:

1. Launch DJI Fly and enter the camera view.

2. Complete all steps in the pre-flight checklist.

3. Tap

. If conditions are safe for takeoff, press and hold the button to confirm.

4. The aircraft will take off and hover approximately 1.2 m (3.9 ft) above the ground.

Auto Landing

Use the Auto Landing function:

1. Tap . If conditions are safe for landing, press and hold the button to confirm.

2. Auto landing can be cancelled by tapping .

3. If the Downward Vision System is working normally, Landing Protection will be enabled.

4. Motors will stop automatically after landing.

Choose the proper place for landing.

Loading ...

Dji MINI 3