Loading ...
Loading ...
Loading ...
KNOW YOUR SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Front Handle
Oar o FrootHandGuard__.!SfarterRo0e
,
,/ ON,STOP
_ _._'[_ _/ _-- Switch
Chain €_'1_1 "
Bar Oil
Fill Cap Starter Housing Fuel Mix Fill Cap
Cylinder Cover
Fast Idle
Throttle
Lockout
Rear
Handl_
\
Throttle
Trigger Chain Brake Chain Brake Nuts
ONISTOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK-OUT
The THROTTLE LOCK-OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
FAST IDLE LOCK
The FAST IDLE LOCK holds the throttle tdg-
ger in the starting position. Activate the fast
idle lock by pressing the throttle lock-out and
squeezing the throttle trigger. With the
throttle trigger squeezed, press the fast idle
lock. Release the throttle lock-out and trig-
ger while holding the fast idle lock button.
)irection
Guide Bar of Chain
Travel
CHOKE KNOB
The CHOKE KNOB activates the choke to
provide additional fuel to the engine during
cold starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN TENSION
Itis normal for a new chain to stretch during first
30 minL_es of operation. YOU should check
your chain tension frequently. See CHAIN
TENSION under the ASSEMBLY section.
WARNING: Muffler isvery hot during
and after use. Do not touch the muffler or al-
low combustible material such as dry grass
or fuel to do so.
8
Loading ...
Loading ...
Loading ...