Loading ...
Loading ...
Loading ...
global.BISSELL.com 7
13. Reinstall brush roll window
by aligning window with foot
and press down until it clicks.
14. Reassemble dirty water
tank. Note: Filter must
be completely dry before
reinstalling.
15. Insert bottom of tank first.
Push top in until tank clicks
into place.
NOTICE To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
Storing Your Machine
Store your machine in a protected, dry area. Since this product uses water, it must not be stored
where there is danger of freezing. Freezing will damage internal components and may void warranty.
After-Cleaning Care (continued)
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing
below, visit global.BISSELL.com or contact Consumer Care.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting on the dock.
Problem Possible Cause Remedies
Machine is not working
Dirty water tank full or not seated
properly.
Empty and reseat tank.
Brush roll window is not latched. Reinstall brush roll window.
Machine is not reclined. Recline machine before pressing power button.
Reduced or no suction
Suction path is blocked. Clean the suction path.
Brush roll is clogged. Clean the brush roll.
Abnormal motor noise Suction path is blocked. Clean the suction path.
Machine is not charging Adapter not connected to dock. Check adapter connection to dock.
Dirty water tank icon is flashing Tank is full or incorrectly installed. Remove, empty and reinstall tank.
Brush roll icon is flashing
Brush roll is entangled by hair and
other objects.
Clean the brush roll.
Self-cleaning cycle button is
flashing
Cleaning cycle was cut off due to
full dirty water tank.
Remove, empty and reinstall tank.
Self-cleaning cycle won’t
complete
Battery needs to be charged. Fully charge before use.
Clean water tank is empty. Refill tank.
Dirty water tank is full. Empty tank.
Note: Any other servicing should be performed by an authorized service representative.
Loading ...