Loading ...
Loading ...
Loading ...
global.BISSELL.com 5
ATTENTION
• This machine is designed to be used on sealed hard floors.
• Do not overwet hardwood floors. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.
4. Dirty water tank indicator
will flash red when tank is full
or removed.
5. Turn machine OFF by
pressing power button. Return
machine to upright position.
Cleaning with Hard Floor Sanitise Formula
Please read “DIRECTIONS FOR USE” on Hard Floor Sanitise label. Use on hard nonporous floors only.
1. Remove visible soil before
cleaning. In HI mode, make
forward and backward passes.
2. Allow floor to remain
visibly wet with formula for
five minutes. This may require
additional passes in HI mode.
3. In HI mode, make forward
and backward passes to
extract formula.
Cleaning Your Floors (continued)
1. Place machine on docking
station. Make sure clean water
tank has cleaning formula and
dirty water tank is empty.
2. Press self-cleaning button
to start cycle. Button light will
pulse while cycle is running.
3. Once complete,
remove brush roll to dry.
See “After-Cleaning Care”
for instructions.
Using the Self-Cleaning Cycle
Loading ...
Loading ...
Loading ...