Loading ...
Loading ...
Loading ...
8
HOW TO BLEND IN A TUMBLER
For smaller amounts, for blending and storing, or for making smoothie drinks to go, use a
tumbler.
1. Follow steps 1-3 from How to Blend in the Blending Pitcher on p. 6.
2. Add ingredients to tumbler; do not exceed the “Max” line.
3. Holding the blade attachment by its collar, screw it on to the open end of the
tumbler and turn it clockwise to tighten. NOTE: The blade attachment goes on what
will be the top of the tumbler after blending is done.
4. Position the tumbler on the base by inserting the blade attachment collar into the
motor base and fitting the locking tabs on the blade attachment into the slots on the
motor base. Press the tumbler firmly down into the base, then turn clockwise until
the blade attachment tabs lock securely in position.
5. Plug in the blender and press a speed button (HIGH, MEDIUM, LOW, or PULSE)
to begin blending. (See p. 9 for more information on speeds.) WARNING: Do not
operate the motor continuously for more than 1 minute at a time. Allow the motor to
rest for 3 minutes before continuing.
6. Press the OFF button to stop blending. (If using the pulse function, the unit will
turn off when the PULSE button is released.)
7. Remove the tumbler from the base by turning blade attachment counterclockwise,
then flip tumbler over so that the blade attachment is facing up. Twist the blade
collar counterclockwise, and then lift blade attachment up and out of the tumbler.
8. If drinking straight from the tumbler, press the tumbler comfort ring onto the lip
of the tumbler. If taking the tumbler on the road, put on the travel lid. If storing the
contents in the tumbler, put on the storage lid.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...