Loading ...
Loading ...
Loading ...
Tip Over Hazard
Do not use slide-out work surface until completely
installed.
Install both hooked stack brackets between washer
and dryer.
Failure to do so can result in death or serious injury.
14. Place the hooked end of the stack bracket over the plastic
clip. Rotate down against the back of the washer if necessary.
Adjust the dryer or work surface forward or backward as
needed and attach the bracket to the washer with 2 of the 3/8"
(16 mm) pan head screws. Attach the bracket to the work
surface with one of the 3/8"(9.5 mm) pan head screws. Tighten
screws. Repeat on the other side.
C
B
/
/
A. Hooked end
B. Stack bracket
C. Slot in dryer back
15. Follow the Installation Instructions that came with your washer
and dryer to complete the installation. For a new washer
follow the Installation Instructions to remove the shipping
bolts.
SLIDEIOUTWORKSURFACEUSE
Your slide-out work surface has several uses.
• The shelf provides a temporary work surface for pretreating,
sorting and folding clothes, as well as a place to rest a laundry
basket.
The handle of the Slide-Out Work Surface has a raised lip that
can be used for hanging items on hangers.
Approximately 10-12 clothing items on hangers can be hung
off the work surface.
SLIDE.OUTWORKSURFACECARE
To clean the interior and exterior: • Use mild soap and water; do not use abrasive products.
• Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the shelf to help keep it looking new.
6
Loading ...
Loading ...
Loading ...