Loading ...
Loading ...
Loading ...
If Your Washer and Dryer are Already Stacked
1. Remove the pan head screws that hold the bracket to the
washer. Lift up on bracket to remove it from the slot in the
back of the dryer.
A
A. Bracket
B. Slot
Repeat on other side.
2. Discard these brackets. Use the brackets that are provided
with the slide-out work surface.
3. Lift up on the plastic clip to remove it from the slot in the back
of the dryer.
4. Place a protective covering, such as cardboard or a blanket,
on the floor.
Excessive Weight Hazard
Use two or more peopJe to move washer or dryer.
Failure to do so can result in back or other injury.
5. Using two or more people, lift the dryer up off the washer and
set it on the floor.
If Your Washer or Dryer Is Still In Its Packaging
Excessive Weight Hazard
Use two or more people to move washer or dryer.
Failure to do so can result in back or other injury.
Position the packaged washer or dryer close to its final location.
• Follow unpacking instructions on the washer or dryer carton.
A. Plastic clip
B. Slot
Loading ...
Loading ...
Loading ...