Loading ...
Loading ...
Loading ...
282 STARTING AND OPERATING
NOTE:
The ParkSense system will automatically disable
when the system detects that a trailer with trailer
brakes has been connected to the Integrated
Trailer Brake Module. The instrument cluster
display will show an “Off” message over the arcs if
the ParkSense system is off, or a “Trailer” message
if the system is on, for as long as the vehicle is in
REVERSE.
The ParkSense switch LED will be on when
ParkSense is disabled or defective. The ParkSense
switch LED will be off when the system is enabled.
If the ParkSense switch is pushed, and the system
is disabled or requires service, the ParkSense
switch LED will blink momentarily, and then the
LED will be on.
SERVICE THE PARKSENSE REAR PARK
A
SSIST SYSTEM
During vehicle start up, when the Rear ParkSense
System has detected a faulted condition, the
instrument cluster display will show the "Rear
ParkSense Unavailable Service Required" or the
"Rear ParkSense Unavailable Wipe Sensors"
message.
When the gear selector is moved into REVERSE, a
vehicle graphic will show in the instrument cluster
display, along with the display overlay “Rear
ParkSense Unavailable Wipe Sensors.” If the
system needs service, the display overlay will read
“Rear ParkSense Unavailable Service Required”
Under this condition, ParkSense will not operate.
If "Rear ParkSense Unavailable Wipe Sensors"
appears in the instrument cluster display make
sure the outer surface and the underside of the
rear fascia/bumper is clean and clear of snow, ice,
mud, dirt or other obstruction, and then cycle the
ignition. If the message continues to appear, see
an authorized dealer.
If "Rear ParkSense Unavailable Service Required"
appears in the instrument cluster display, see an
authorized dealer.
CLEANING THE PARKSENSE SYSTEM
Clean the ParkSense sensors with water, car wash
soap and a soft cloth. Do not use rough or hard
cloths. Do not scratch or poke the sensors.
Otherwise, you could damage the sensors.
PARKSENSE SYSTEM USAGE
P
RECAUTIONS
NOTE:
Ensure that the rear bumper is free of snow, ice,
mud, dirt and debris to keep the ParkSense
system operating properly.
Jackhammers, large trucks, and other vibra-
tions could affect the performance of Park-
Sense.
When you move the gear selector into REVERSE
with ParkSense turned off, the instrument
cluster display will show "Off" on the vehicle
graphic arcs for as long as the vehicle is in
REVERSE.
ParkSense, when on, will reduce the volume of
the radio when it is sounding a tone.
20_DJD2_OM_EN_USC_t.book Page 282
Loading ...
Loading ...
Loading ...