Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
10
B
C
A
4 ] Remove and set aside the damper flap (A). Remove the blower cover plate (in grey). Using
a 11/32” nutdriver or socket, remove the lock nut retaining the flange of the cover plate to the
inner back of hood (see inset). Remove the cover plate 7 retaining screws using a Phillips
screwdriver, then set the blower cover along with its screws and nut aside.
Prepare the Hood
1 ] If present, remove all protective polyfilm from the hood and/or parts.
2 ] Remove 2 screws from top of hood. Remove the 3¼” x 10” adapter and the 3¼” x 14” adapter
frame from the back of hood. Keep the screws.
SCREWS
SCREWS
3 ] Using the finger cup, remove the grease filters from the hood by pushing down and tilting
filters out .
1
2
3
45
6
7
BACK OF HOOD
LOCK NUT
Loading ...
Loading ...
Loading ...