Loading ...
Loading ...
Loading ...
12 English
Installation
Installation
18. When the lower duct cover assembly
is complete, reassemble the filter in
the reverse order of disassembly.
NOTE
To install extension kit, please follow
same process.
WARNING
Be sure to use an outlet with a ground terminal for safety. This can prevent the risk
of electric shock, fire, or malfunction. If the outlet does not have a ground terminal,
purchase a separate grounding wire and connect it to the grounding line.
Grounding Pin
CAUTION
Do not ground on gas pipes, water
pipes, telephone lines, etc.
NOTE
Be sure to install a short-circuit breaker
where there is a risk of a short circuit.
Upper Duct
Lower Duct
16. Assemble the lower duct cover to
the hood. Magnets on the upper duct
cover hold the lower duct cover in
place.
NOTE
The magnet must be attached to the
upper line of the lower duct.
17. Remove the filter at the bottom of
the hood.
Assemble the lower duct cover by
fitting a 10 mm hood fixing screw to
the hole in the lower duct cover.
CAUTION
When removing the filter, use both
hands to avoid dropping the filter.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 12MANUAL INSTALL_Range Hood_DG68-01500A.indb 12 2023-01-05 오후 3:15:322023-01-05 오후 3:15:32
Loading ...
Loading ...
Loading ...