Loading ...
Loading ...
Loading ...
6
Operating Instructions
Can Opener
1. Lift the blade bracket and plug the unit into an
electrical outlet.
2. Tip the can forward so that its rim is under
the locating post and against the drive wheel. Press
down the cutting lever and make sure the blade is
inside the rim (see Fig. 4).
3. The can will rotate and the blade will cut the can
lid open. Because of the hands-free feature, it is not
necessary to hold blade bracket down or support the
can during cutting.
NOTE: In case the total weight of a can is over
18oz, it is necessary to press and hold the can
opener to avoid overturning.
4. When the can is opened, the can opener will
stop automatically. To remove the can, hold it with
one hand and raise the blade bracket with the other
one.
5. CAUTION: Avoid contact with the cut edges of the can or lids as they are sharp, carefully remove the
lid from the magnet and discard.
NOTE: The time of continuously opening cans should not exceed 3 minutes.
6. The excess cord can be stuffed into cord storage at the back of the unit. Feed the cord through the notch
for convenient storage.
Warning: The cans opened with this can opener must be less than 21 oz in weight.
Can Opening Tips
1. This can opener should not be used to open cans designed to be opened by another method,
such as a pull tab, peel-off foil seal, or rolling key. This can opener will not open rimless cans or cans
with angled corners.
2. If there is a dent in the rim of a can, open the other end or start the cutting action just beyond
the dent.
3. Cans with heavy seams, uneven rims or odd shapes may cause the can opener to stall. If this occurs,
turn the can slightly by hand to aid the cutting action.
4. Cans with aluminum lids will not stick to
the magnet.
Bottle Opener
Before opening bottles, unplug the power supply from
the electric outlet.
1. To open a bottle, grasp it and position the cap under
the metal hook part in the bottle opener (see Fig. 5).
NOTE: Be sure the bottle neck is not under the
metal hook part, or the glass may break. Hold the
can opener with one hand and pull down to pop the
cap off with the other one.
2. The bottle opener at the front of the unit will only
remove metal bottle caps. Do not use it for the bottle
with screw-off cap or pull ring.
Figure 4
Figure 5
Hold the can
opener with
one hand
Pull down and
pop the cap of
with the other
hand
SO-315268_14709_BELLA BASICS_Can opener_Family Dollar_IM r4.indd 6 2020-02-04 2:00 PM
Loading ...
Loading ...
Loading ...