Tripp Lite SV60KS3P0B Owner's Manual

Loading ...

7. Installation

7.2.1 Installing a Power Module

WARNING:

Ensure all Power Modules contain identical ﬁrmware versions prior to installation.

Each Power Module capacity is 20kVA/18kW and comprises:

• Power Factor Correction Rectiﬁer

• Battery Charger

• Inverter

• Control Circuit

Figure 7.2

The hot-swappable Power Module allows for quick maintenance and system expansion. A latch located at the front of each module ﬁxes and

locks the module in its assigned slot. To install the Power Module, follow the procedure below.

1. Using the DIP switch on the front panel of each Power Module, set the module ID (0-7). The module ID should be exclusive per module.

Note: The default position is 0 for all DIP switches.

Module ID Module DIP Switch

0 POWER

1 POWER

2 POWER

3 POWER

4 POWER

5 POWER

6 POWER

7 POWER

Table 7.1

2. Place the ready switch on the front panel of the Power Module in the unlocked position by rotating the knob counterclockwise.

3. Remove blanking panel and insert Power Module into its identiﬁed frame position and slide into cabinet (retain the four screws to install Power

Module in step 4).

Loading ...

Tripp Lite SV60KS3P0B SmartOnline SV Series 60kVA Small-Frame Modular Scalable 3-Phase On-Line Double-Conversion 208/120V 50/60 Hz UPS System