Makita GTR01D1 User Manual

Loading ...

18 ENGLISH

1. Loosen the clamp screw, then install the trimmer

guide on the trimmer base, and then tighten the clamp

screw.

Fig.56

► 1. Clamp screw

2. Loosen the clamp screw and adjust the distance

between the trimmer bit and the trimmer guide by turn-

ing the adjusting screw (1 mm (3/64") per turn). At the

desired distance, tighten the clamp screw to secure the

trimmer guide.

Fig.57

► 1. Adjusting screw 2. Clamp screw

3. Move the tool with the guide roller riding the side

of the workpiece.

Fig.58

► 1. Workpiece 2. Trimmer bit 3. Guide roller

Using the tool with the tilt base

The tilt base is used for trimming the edge of laminate

sheet or similar materials.

The tilt base is convenient for chamfering. Loosen the

wing screws, then tilt the tool at the desired angle, and

then tighten the wing screws.

Firmly clamp a straight board to the workpiece and use

it as a guide against the tilt base. Feed the tool in the

direction of the arrow.

Fig.59

► 1. Wing screw

Using the tilt base plate with the

trimmer base

To use the trimmer base with a square base plate,

remove the base plate from the tilt base, and then

attach it to the trimmer base.

Fig.60

► 1. Tilt base plate 2. Trimmer base plate

NOTICE: Use screws on the trimmer base when

installing the tilt base plate. The screws on the

tilt base are shorter than the screws on the trimmer

base.

Loading ...

Makita GTR01D1 40V max XGT Brushless Cordless Compact Router Kit 2.5Ah