Loading ...
Loading ...
Loading ...
10
2. Keep Filter Clean
8. Reset Filter's lifetime.
The filter lifetime should be reset if lights up, after
replacing the new filter, you need to reset filter lifetime.
1). Plug in the air purifier and turn it on.
2). Press and hold for 3 seconds.
3). The light will turn off, indicating that the reset
is complete.
When using the air purifier in an environment of heavy pollution, the lifespan
In order to keep your purifier working with more efficiency and life-time, clean
the filter (pre-filter side only) every 2 weeks with the Instruction Below:
1). Clean out any dust, hair, or furs remain on the pre-filter by using the vacuum
hose.
2). Clean out any dust, hair, or furs remain on the bottom cover by using the
vacuum hose.
3). DO NOT wash the filter with any water or liquid.
of the air filter may be significantly reduced. You can change the filters even
if does not light up. Follow the steps below to perform a hard reset.
1). Replace the air filters as mentioned in the Filter Replacement section.
2). Plug in the air purifier and keep in standby mode.
3). Press and hold for 3 seconds, and it will light up.
4). Press and hold again for 3 seconds, and it will turn off. The reset
is now complete.
Filter replacement force mode
3seconds
（ ）h
Loading ...
Loading ...
Loading ...