Loading ...
Loading ...
Loading ...
6 Connect the ISP solution interface cable into the color‑coded receptacle on the system board.
7 Firmly connect the ISP solution to the system board cage using the two screws.
8 Reattach the system board cover.
Note: If you have removed an optional printer hard disk while installing the Internal Solutions Port, then
reinstall the printer hard disk first before reattaching the system board cover. For more information, see
“Installing a printer hard disk” on page 35.
Installing a printer hard disk
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Additional printer setup 35
Loading ...
Loading ...
Loading ...