Loading ...
Loading ...
Loading ...
4 Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
5 Push the memory card straight into the connector until it clicks into place, and then push the latches to firmly attach
the card into the connector.
1
2
2
6 Reattach the system board cover.
Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed,
but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
Additional printer setup 30
Loading ...
Loading ...
Loading ...