SereneLife SLSFE342 User Manual

Loading ...

SETTING THE USER CODE

OPENING THE SAFE WITH THE EMERGENCY KEY

AUTOMATIC LOCK

• With the door open, press the reset button one, start setting code when the yellow

lights goes on.

• Input new code (3-8 digits), and press the “A” or “B”(“C” or “E”) button to conrm with 2

buzzer beeps, which indicates the acceptance and storage of the new code. The yellow

light ashes with 3 buzzer beeps, which means the code changing is not eective, and

you need to try again.

Upon rst receipt of the safe, or either the electronic circuit malfunction or codes unknown.

You could also use the emergency key to open the safe.

• Remove the cover of the emergency lock.

• Insert the emergency key, turn it count clockwise, then turn the knob (or master key)

clockwise to open the door.

• 3 continuously wrong entries will activate the warning beep for 20 seconds.

• Another 3 continuously wrong entries will active the warning beep for 5 minutes.

NOTE: The key pad would be disabled during the beeping. You can only stop the beeps

by opening the safe with emergency key and power-cut by removing the battery.

Loading ...

SereneLife SLSFE342