Loading ...
Loading ...
3
!
!
!
NOTE: Finish operation, pull out the emergency key and keep it in a safe place.
NOTE: Replace 4 fresh batteries by lining them up in a manner as indicated by the
“+” and “-“ signs. When outage for longer than thirty minutes, you should reset
the user code.
NOTE: The user preset code ”159”. Please input the user code again if the yellow
light ashes with three buzzer beeps.
OPENING YOUR SAFE FOR THE FIRST TIME
INSERTING THE BATTERIES
OPENING THE DOOR
CLOSING THE DOOR
Upon rst opening, users should open the safe with the emergency key. The operation
in details refers to “opening the safe with the emergency key”.
• Remove emergency lock cover, then insert the emergency key, and turn it
counterclockwise.
• Turn the knob (master key) clockwise to open the door.
• Open the door with the emergency key.
• Insert 4 x 1.5V batteries into the battery compartment.
• Under normal condition, if both of the red and the green lights are on at the same
time, it means the voltage is low and you should insert new batteries.
• Input your user’s code (3 to 8 digits), each pressing results one buzzer beep and
yellow light ashes.
• Press “A” or “B”(“C” or “E”) button, the green light will be on.
• Rotate the knob (or master key) clockwise and pull outwards within 5 seconds, the
door is opened.
• Turn the knob (or master key) counter-clockwise to close the door.
Loading ...
Loading ...
Loading ...